Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Upgraded A&K 249 with two mags

  • 28-02-2013 2:46pm
    #1
    Registered Users, Registered Users 2 Posts: 1,977 ✭✭✭


    Hi all I,m putting this up for a day or so I need some cash to shelve and plyline my van and need to do it this weekend, I am sorry but no trades, But open to realistic offers
    I got this new from SEA Last summer, It has never been skirmished as I only collect,
    It was originally the Mk1 with the skeleton stock and was front wired, I rewired it two the back and put the full stock and heatsheild on it, The hopup chamber was replaced with a Classic army one and the motor was replaced with a high torgue new one, It has a metal dummy ammo belt and comes with two box mags, The original mag is not perfect and has no sound control it ,it never did, It feeds on auto wind but sometimes it will stop feeding a little tap sorts it out, The second mag I got new and is 100% perfect with no feeding issues, I also added an m107 type flashider a longer inner barrell, And the hop up bucking was also replaced, It has the original box also. I have spent between the gun and all the upgrades and accessories just under 600 euro, And it sits on my gun rack, It fires at 315 on a madpul chrono and I am now looking for 350 for it, Any inspection or questions welcome,

    Payment cash only, Based in south Kilkenny will tavel as far as Waterford ,Clonmel, Paulstown, New Ross, Maybe a bit further based on offer

    Cheers all
    DSCF2120_1.jpg
    DSCF2121_1.jpg
    DSCF2122_1.jpg
    DSCF2123_1.jpg


Comments

  • Registered Users, Registered Users 2 Posts: 1,977 ✭✭✭Just a Plinker


    May also take a part exchange of up to 150 euro in value,


  • Registered Users, Registered Users 2 Posts: 1,977 ✭✭✭Just a Plinker


    bump


  • Registered Users, Registered Users 2 Posts: 718 ✭✭✭$kilkenny


    Any trades in particular your looking for?
    Got a few m4s id part with and a bi of cash on my part.


  • Registered Users, Registered Users 2 Posts: 1,977 ✭✭✭Just a Plinker


    M4's are grand mate, I'm kinda partial to them lol, And from the sound of your handle you are not to far away from me pal
    $kilkenny wrote: »
    Any trades in particular your looking for?
    Got a few m4s id part with and a bi of cash on my part.


  • Registered Users, Registered Users 2 Posts: 718 ✭✭✭$kilkenny


    Oh stop im the same... Ive got 4 m4 platforms but there all just a little bit different so I wouldnt mind what anyone else says :-)
    im only 8 miles south of the city so by the sounds of it a stones throw from yourself.
    Anyway back to business, have a cyma m4a1, completely stock, had it a year, not the most beautiful gun externally but it puts a smile on my face to shoot it, thats comparing it to my ares tar and g&p m16 lol.
    Second up is classic army m4 cqb, not working 100% at the minute, a little squeky when she shoots but im planning on going through the shimming and stuff myself to see what the story is, its my project for next year.
    And then a 50 euro note on top aswell as I can collect it.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 1,977 ✭✭✭Just a Plinker


    Hi mate sorry but I can only take a trade to the value of 150 at the most need a few hundred euro kinda pronto , I'm in Windgap Just around the corner lol

    $kilkenny wrote: »
    Oh stop im the same... Ive got 4 m4 platforms but there all just a little bit different so I wouldnt mind what anyone else says :-)
    im only 8 miles south of the city so by the sounds of it a stones throw from yourself.
    Anyway back to business, have a cyma m4a1, completely stock, had it a year, not the most beautiful gun externally but it puts a smile on my face to shoot it, thats comparing it to my ares tar and g&p m16 lol.
    Second up is classic army m4 cqb, not working 100% at the minute, a little squeky when she shoots but im planning on going through the shimming and stuff myself to see what the story is, its my project for next year.
    And then a 50 euro note on top aswell as I can collect it.


  • Registered Users, Registered Users 2 Posts: 718 ✭✭✭$kilkenny


    unfortunatly I dont have the cash at the minute :(
    Stupid exams has me scint.
    Windgap, sure tis only round the corner from stoneyford alright haha.


  • Registered Users, Registered Users 2 Posts: 1,977 ✭✭✭Just a Plinker


    Bump , Any realistic offer won,t be refused


  • Registered Users, Registered Users 2 Posts: 1,977 ✭✭✭Just a Plinker


    Bumpy

    Any trade and cash my way, the worst I con do is say no


  • Registered Users, Registered Users 2 Posts: 718 ✭✭✭$kilkenny


    Classic army m4 cqb and 150 cash collected perhaps?


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 1,977 ✭✭✭Just a Plinker


    Hi mate is the classic army Full metal, sportsline or proline etc

    Cheers mate
    $kilkenny wrote: »
    Classic army m4 cqb and 150 cash collected perhaps?


  • Registered Users, Registered Users 2 Posts: 718 ✭✭✭$kilkenny


    She is a proline and full metal.
    Had some work done in 2011 like its shimming, bearings, new piston at the time, has an src hi torque motor and a guarder hop rubber installed over the summer gone and new trigger contacts

    Shoots really good but for some reason I changed the barrel back to its stock lenght and it jams with the odd shot. I dont understand why but im going to look into it over the weekend.


  • Registered Users, Registered Users 2 Posts: 1,977 ✭✭✭Just a Plinker


    Make it 170 and I'll sort out the problems with the M4 myself mate

    $kilkenny wrote: »
    She is a proline and full metal.
    Had some work done in 2011 like its shimming, bearings, new piston at the time, has an src hi torque motor and a guarder hop rubber installed over the summer gone and new trigger contacts

    Shoots really good but for some reason I changed the barrel back to its stock lenght and it jams with the odd shot. I dont understand why but im going to look into it over the weekend.


  • Registered Users, Registered Users 2 Posts: 718 ✭✭✭$kilkenny


    Dammit new I forgot something, its currently wired to deans, but the person that did it for me wired it backwards, so the female is on the gun.
    I have a tamiya connector here and a set of deans and ill throw them in aswell.
    If it sounds good then we have a deal.
    And I can collect over the weekend.


  • Registered Users, Registered Users 2 Posts: 1,977 ✭✭✭Just a Plinker


    Grand mate 170 and the proline fire me a pm, I'll talk to you tomorrow pal


  • Registered Users, Registered Users 2 Posts: 718 ✭✭✭$kilkenny


    Pics just incase u want a look, will include a high cap aswell.


  • Registered Users, Registered Users 2 Posts: 718 ✭✭✭$kilkenny


    The reciever and the broken bolt release.


  • Registered Users, Registered Users 2 Posts: 718 ✭✭✭$kilkenny


    Sorry about that,stupid phone has a problem with uploading pictures.


  • Registered Users, Registered Users 2 Posts: 1,977 ✭✭✭Just a Plinker


    Rear wired mate? Is the sling mount still on the front can't see in the pics, No other issues with the exception of the noise when firing and the broken bolt release
    $kilkenny wrote: »
    The reciever and the broken bolt release.


  • Registered Users, Registered Users 2 Posts: 718 ✭✭✭$kilkenny


    Yep front sling mount is still there, yep and the odd fact it jams with its current barrel but when a different one is placed in its fine.
    After that its just normal wear from sights and use.


  • Advertisement
  • Registered Users, Registered Users 2 Posts: 1,977 ✭✭✭Just a Plinker


    Grand mate thats all I need to know see you over the weekend, I'll pm my number
    $kilkenny wrote: »
    Yep front sling mount is still there, yep and the odd fact it jams with its current barrel but when a different one is placed in its fine.
    After that its just normal wear from sights and use.


  • Registered Users, Registered Users 2 Posts: 1,977 ✭✭✭Just a Plinker


    Mods please mark as sold


Advertisement