Various Parts For Sale

LCRC_BAX

Due to my winter bikes frame cracking recently I have stripped it down and decided to sell of the parts as I no longer have a need for them. All parts are used but in good working order. I will get photos of all items posted tomorrow evening, I am located in Dublin 15 and would prefer collection if possible. Feel free to ask any questions! Thanks RB.

*************************************

1. Set of Dedacciai 'Black force 2' - 1" Steerer Carbon Forks. 230mm left on steerer tube. I sourced these for my steel frame, perfect upgrade for any steel bike. There is some damage to paint under the crown where mudguard rubbed (not visible when on bike), apart from that excellent condition. €70.00.

2. FSA 1" Headset to suit above forks. Requires new bottom bearing (not critical) or top/bottom bearings could be swapped to get a bit more life from it. €15.00

3. Columbus Carbon 'Tusk Light' Forks, 1 1/8", 245mm left on steerer tube. Full carbon fork, excellent condition, one small stone chip. €85.00

4. 26mm Specialized Carbon Seatpost with Zertz insert. 350mm. Excellent condition. €20.00.

5. Pair of Shimano 105 STI 9SPD Shifters. For a Double Chainset. Well worn but working well and plenty of life left in them, good upgrade for a winter bike etc. Top caps missing and some scratches to levers. €60.00

6. Set of Shimano 105 brake calipers. Some marks on rear caliper from mudguard rubbling. Work perfectly well. Come with shoes but pads need replacing. €40.00

7. Shimano 105 Double 53/39 Chainset. 175mm Crank Length. Suits Hollowtech BB. Some marks on crank arms from overshoes, but in excellent condition otherwise. €85.00

8. Shimano (105) Italian Thread Hollowtech BB. Purchased 3 weeks ago, covered approx 200 miles. Some marks on notches from fitting / removing but otherwise as new. €20.00

9. Shimano 105 Braze on Front DR. Excellent Condition. €20.00

10. SRAM 9SPD Chain. 200 miles done. €15.00

11. Shimano (Tiagra I think) 9 SPD 12-23 Cassette. Covered 200 miles, €20.00.

12. Set of Shimano down tube cable stops/adjusters. Good condition. €5.00.

************************************

Thanks for looking.

Razleavy

I'm interested in the 26mm Specialized Carbon Seatpost with Zertz insert for €20.00 if you would be willing to post (I'll cover the postage cost, naturally!).

colm_gti

I'll take the calipers if they're 5600 or 5700?

Might also be interested in the chainset if it's 5700....

LCRC_BAX

Hi,

Chainset is as per link (5600)

Calipers are perhaps model before 5600 - will check when I get home.

Cheers.

LCRC_BAX

Razleavy wrote: »

I'm interested in the 26mm Specialized Carbon Seatpost with Zertz insert for €20.00 if you would be willing to post (I'll cover the postage cost, naturally!).

Hiya,

Yes no problem, looks like you're in Sligo so say €5 to post?

Razleavy

LCRC_BAX wrote: »

Hiya,

Yes no problem, looks like you're in Sligo so say €5 to post?

That's perfect

LCRC_BAX

Razleavy wrote: »

That's perfect

Spot on, will PM you for payment details.

colm_gti

LCRC_BAX wrote: »

Hi,

Chainset is as per link (5600)

Calipers are perhaps model before 5600 - will check when I get home.

Cheers.

Considering you'd get a brand new 5700 crankset for €130, and a pair of brand new 5700 calipers for €68, I'd be willing to offer €80 for the crankset and brake calipers, provided they're 5600....

tonytiger81

would you take a tenner for the cassette? i noticed online they are E20 new (http://www.bike24.com/1.php?content=8;navigation=1;product=8008;page=1;menu=1000,4,27;mid=0;pgc=0;orderby=2) ! im fixing up a tommasini and could do with a cheap one for now. Could drive out to d15 tonight as im in d7

doozerie

Re the Deda forks, do they have an alloy steerer? And I presume they have mudguard eyes?

I presume from what you say of the mudguard mark that they are used - what age are they and did you get them new or second hand? Do you have any photos? Also, do you know what kind of clearance they have, in particular I'm wondering if they could take 25mm tyres? Could you provide a measure of the length from the crown (just below lower bearings) to centre of dropout?

Thanks.

LCRC_BAX

tonytiger81 wrote: »

would you take a tenner for the cassette? i noticed online they are E20 new (http://www.bike24.com/1.php?content=8;navigation=1;product=8008;page=1;menu=1000,4,27;mid=0;pgc=0;orderby=2) ! im fixing up a tommasini and could do with a cheap one for now. Could drive out to d15 tonight as im in d7

Hiya, with postage the cassette is €30 from Germany. I'll do €15.00. I'm out this evening but will be around tomorrow eve. Let me know.

tonytiger81

sorry lad but 10 is about my limit as i'm a student. i'll bow out of this one. glws.

LCRC_BAX

colm_gti wrote: »

Considering you'd get a brand new 5700 crankset for €130, and a pair of brand new 5700 calipers for €68, I'd be willing to offer €80 for the crankset and brake calipers, provided they're 5600....

Sorry,

Will hold off for a better offer than that.

LCRC_BAX

doozerie wrote: »

Re the Deda forks, do they have an alloy steerer? And I presume they have mudguard eyes?

I presume from what you say of the mudguard mark that they are used - what age are they and did you get them new or second hand? Do you have any photos? Also, do you know what kind of clearance they have, in particular I'm wondering if they could take 25mm tyres? Could you provide a measure of the length from the crown (just below lower bearings) to centre of dropout?

Thanks.

Hiya,

Yes they have an alloy steerer tube. They are used and they don't have eyelets. Approx 2 years old. They will have clearance for a 25mm tyre on a 700c wheel. Will get crown measurement for you later & intend to post photos shortly.

Any more q's please ask.

colm_gti

LCRC_BAX wrote: »

Sorry,

Will hold off for a better offer than that.

Can you confirm what model the calipers are?

doozerie

LCRC_BAX wrote: »

Hiya,

Yes they have an alloy steerer tube. They are used and they don't have eyelets. Approx 2 years old. They will have clearance for a 25mm tyre on a 700c wheel. Will get crown measurement for you later & intend to post photos shortly.

Any more q's please ask.

Have you managed to take the measurement yet? And photos too?

Morrisseeee

Would that front derailleur work on my compact double and 9 speed cassette ?
If so, I'll offer €15 (minus postage).