Ultegra 6700 Rear Mech + Chainset

TheDocMan

Ultegra 6700 silver medium cage rear mech. Excellent cond with about 500km use.

Asking 50e ono.

Ultegra 6600 SL Chainset. Compact 50/34, 172.5 crank lenght.
Rings excellent and beautiful condition. Hollowtech axle perfect, see pic.

Asking 120e ono.

Can post at cost.

Mr. Grieves

Is the mech 9 or 10 speed? If it's 9 speed, can anyone say if it will work with a 10 speed shifter & cassette? I can't think of a reason why it wouldn't...

TheDocMan

6700 is Shimano 10sp.
This Rear mech will work with any Shimano 10sp STI Shifters but not Sram or Campag shifters.

Mr. Grieves

Ok, I'll offer 40 including postage for the rear mech.

TheDocMan

Best ill do is 45e and that's delivered to your door!

Lemag

TheDocMan wrote: »

6700 is Shimano 10sp.
This Rear mech will work with any Shimano 10sp STI Shifters but not Sram or Campag shifters.

I think that it should work with Campag shifters but not with Sram.

Ulick

Offer €100 for the chainset

TheDocMan

Never tried that mix -campag +shimano-but makes sense that it would work.

TheDocMan

Need a bit more Ulick. Thanks for looking.

Lemag

TheDocMan wrote: »

Never tried that mix -campag +shimano-but makes sense that it would work.

It's because Shimano and Campag shifters move the cable by the same amount. One can have Campag shifters with Shimano mechs but after that the cassette, chain and chainset would have to be Shimano/Sram compatible. Yet another combo could be Shimano shifters with Campag mechs but the cassette, chain and chainset would then all have to be Campag compatible. If one has Sram shifters then one must use Sram mechs but the cassette, chain and chainset can then be any combination of Shimano/Sram compatible stuff.

So.. your Ultegra shifters should work with either Shimano mechs or Campag mechs.

Edit - Just noticed that you're selling an Ultegra mech and NOT shifters. The above still applies though.

Mr. Grieves

Sorry, TheDocMan, 40 is my highest offer, I have another option for 45.

Thanks for the info Lemag, I'm replacing SRAM mech as I have Shimano shifters. I'd mistakenly thought Shimano/SRAM were 100% compatible, but the one thing which is different is the shifter cable pull, as you say.

TheDocMan

Could be interested in swap/ partial swap for sram rear mech. Are you intrested in exchange? What model/ condition is youre rear mech?

Mr. Grieves

It's a SRAM Rival. Condition is fine but it's a few years old. Wouldn't value it at more than 20 euro.

TheDocMan

Fair enough. Rival rear mech and 20e?
If that's agreed ill send this on tues once we swap details. Thanks
PS ,any other Rival used parts available?

Mr. Grieves

Sounds good. Sorry, no other Rival bits. I'll PM you.

TheDocMan

Ultegra mech sold. Ultegra chainset withdrawn. Thread can now be closed. Thanks