2001 fiat punto

JUSTsomeBLOKE!

hi im looking online for a set of alloys.. i came across a set and the size of them are a 15" 4x100.. i know the punto takes 4x98's but would i have to customise or fiddle with anything for them to fit? thanks:D

JUSTsomeBLOKE!

Anyone??

paddy147

JUSTsomeBLOKE! wrote: »

hi im looking online for a set of alloys.. i came across a set and the size of them are a 15" 4x100.. i know the punto takes 4x98's but would i have to customise or fiddle with anything for them to fit? thanks:D

A set of "wobbley bolts" will fit 4 x 100mm wheels to 4x98 Punto hubs.


You also need to make sure the bore size of the wheel will match up to the bore size of the punto hub.....(58.1 as far as I can remember).

The Punto offset is also around 35-37 degrees too so the wheel will have to be more or less the same too.

JUSTsomeBLOKE!

Thanks paddy. Do the wobbly bolt's have to be any specific sizes?

paddy147

JUSTsomeBLOKE! wrote: »

Thanks paddy. Do the wobbly bolt's have to be any specific sizes?

Same size and thread pattern as the oem punto bolts.

I think its M12 x 1.25mm thread pattern.

paddy147

Tons of them on ebay,but your local car tuning shop/alloy wheel shop should have them in stock


http://www.ebay.ie/sch/i.html?_nkw=12+x+1.25+wobbly+wheel+bolt&_sacat=0&_dmpt=UK_Cars_Parts_Vehicles_Wheels_tyres_Trim_Nuts_ET&_odkw=12+x+1.25+wheel+bolt&_osacat=0&_trksid=p3286.c0.m270.l1313

JUSTsomeBLOKE!

thanks again for that