Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Please note that it is not permitted to have referral links posted in your signature. Keep these links contained in the appropriate forum. Thank you.

https://www.boards.ie/discussion/2055940817/signature-rules
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Problem with corsa window

  • 02-10-2012 11:30am
    #1
    kincaid
    Registered Users, Registered Users 2 Posts: 1,402 ✭✭✭


    hi all, got a 2005 drivers door electric window that started to give trouble..
    it goes up perfect till it gets to an inch from closing fully at top and then just stopped and automatically goes back down again.
    Any ideas

    thanks


Comments

  • #2
    Mint Sauce
    Registered Users, Registered Users 2 Posts: 29,293 ✭✭✭✭Mint Sauce


    kincaid wrote: »
    hi all, got a 2005 drivers door electric window that started to give trouble..
    it goes up perfect till it gets to an inch from closing fully at top and then just stopped and automatically goes back down again.
    Any ideas

    thanks

    Is there possibly anything blocking the window from closing. Not sure about the corsa but my 06 astra will automatically go back down if anything stopping it closing fully.


  • #3
    kincaid
    Registered Users, Registered Users 2 Posts: 1,402 ✭✭✭kincaid


    no dont see anything


  • #4
    massy086
    Registered Users, Registered Users 2 Posts: 2,851 ✭✭✭massy086


    Initialization comprises:
    Erasure of initialization
    Reinitialization

    An initialization must be performed:
    In the event of malfunctions, e.g. no one-touch control function, no opening or if available no comfort function is possible
    After the power window drive has been replaced
    After work is carried out on the power window mechanism
    If necessary, after a power supply interruption, e.g. disconnection of the battery or disconnection of the power supply to the door
    After the door window glass has been removed and installed or replaced
    After adjustment work on the door window glass
    After adjustment work on the convertible top
    After replacement of seals

    Erasure of initialization:
    Open door window glass fully
    Actuate power window switch in "Open" position (second switch position) and hold down for between 15 and 20 seconds

    This erases initialization of the power window, anti-trapping protection and toll function are inactive.
    Check whether one-touch control (toll) function is inactive, otherwise repeat procedure.

    Reinitialization:
    Close door window completely
    After upper end position is reached, interrupt actuation of power window switch and then hold switch again for approx. 1 second in "Close" position (second switch position)

    This completes initialization.


Advertisement