FS; Alan track bike/fixed gear

lovelyoner

Evening everyone,

Will finish is post off later on this evening, meant to be studying right now. Alas the marvels of procrastination.

Thinking of selling is Alan again, as I don't do a whole lot of cycling anymore and it's pointless having this lying around. I'll get straight into the specs;

Alan Track Frame, 54/TT, 56/ST
Alpina Carbon Forks, 1"
BBB headset
Shimano UN-somethingorother BB
Dura ace wheelset, laced to mavic open pros. Rear hub is in perfect condition, front hub is a complete and utter piece of shít, badly needs to have the bearings overhauled. Although that hasn't stopped me from riding it, all the same. 17t BLB cog and DA lockring.
Dura Ace crankset, 48t chainring, NJS stamped. Scuffed but not scratched.
Mks Nuevo pedals w/ cages and double straps.
Profile airwing bullhorns and GT stem.
Generic faux carbon seatpost, and an slr saddle

It's a cracking frame, uber reactive, in excellent condition. No scratches, dents, chips ect

I'm really not that sure on pricing it, as I've never seen an alan track before and that's with me perving on bike websites for the past few years...So, we'll start at €550, which I don't think is all that outrageous for a bike of this quality.

I'd definitely be interested in splitting her up, HOWEVER, this would be subject to having solid buyers for the bulk of the parts, ie, no cowboys offering a 5er and a can of Dutch for a chain link.

If you are interested in a particular part, please state your interest and I'll contact you in the event of a split.

Photos on their way later.

Based in Seapoint, Dublin. Would prefer collection. Might post as well.

Thanks&Enjoy!

r27

lovelyoner wrote: »

Evening everyone,

Will finish is post off later on this evening, meant to be studying right now. Alas the marvels of procrastination.

Thinking of selling is Alan again, as I don't do a whole lot of cycling anymore and it's pointless having this lying around. I'll get straight into the specs;

Alan Track Frame, 54/TT, 56/ST
Alpina Carbon Forks, 1"
BBB headset
Shimano UN-somethingorother BB
Dura ace wheelset, laced to mavic open pros. Rear hub is in perfect condition, front hub is a complete and utter piece of shít, badly needs to have the bearings overhauled. Although that hasn't stopped me from riding it, all the same. 17t BLB cog and DA lockring.
Dura Ace crankset, 48t chainring, NJS stamped. Scuffed but not scratched.
Mks Nuevo pedals w/ cages and double straps.
Profile airwing bullhorns and GT stem.
Generic faux carbon seatpost, and an slr saddle

It's a cracking frame, uber reactive, in excellent condition. No scratches, dents, chips ect

I'm really not that sure on pricing it, as I've never seen an alan track before and that's with me perving on bike websites for the past few years...So, we'll start at €550, which I don't think is all that outrageous for a bike of this quality.

I'd definitely be interested in splitting her up, HOWEVER, this would be subject to having solid buyers for the bulk of the parts, ie, no cowboys offering a 5er and a can of Dutch for a chain link.

If you are interested in a particular part, please state your interest and I'll contact you in the event of a split.

Photos on their way later.

Based in Seapoint, Dublin. Would prefer collection. Might post as well.

Thanks&Enjoy!

Intrested in a few bits
What lenght are the cranks ?
Are the nubs njs stamped , and are the pedals njs stamped
I'd be intrested in the wheels , cranks , pedals/straps/cages
Pm me

Beasty

r27 wrote: »

Pm me

All discussion must be kept in-thread until a deal is agreed in principle

CramCycle

What would she be weight wise?

lovelyoner

Apologies for not getting back sooner.

She weighs in at 7.9KG, with the setup shown in the photos.

Front wheel is NJS stamped, rear is not.
Cranks are 165 in length, and are NJS stamped too.
Pedals aren't NJS stamped.

I'll now consider splitting her up, will edit the OP with prices for each, cheers.

Edit; just found out you can't edit OP from iPhone, so rough prices until I'm on a computer: wheels 200, cranks etc 140, pedals etc 35, F&F 230. All prices are ONO

it's mick

I'd take the wheels, cranks and bottom bracket for €300 if you're interested. And I'd collect.

lovelyoner

it's mick wrote: »

I'd take the wheels, cranks and bottom bracket for €300 if you're interested. And I'd collect.

Best I could do would be cranks/wheels for 300, or, cranks/BB/wheels for 320.

Cheers

r27

How much for just the cranks ?
Thaanks

lovelyoner

150 for cranks and c'ring, cheers

it's mick

Would you go €290 for the wheels and cranks so? I'm offering a tenner less just to get the bearings in the front wheel sorted. I'll collect tomorrow.

lovelyoner

it's mick wrote: »

Would you go €290 for the wheels and cranks so? I'm offering a tenner less just to get the bearings in the front wheel sorted. I'll collect tomorrow.

That seems fair enough alright. I'll take you up on that offer, will PM now with details!

colm_gti

Do you still have this?

lovelyoner

colm_gti wrote: »

Do you still have this?

I do indeed.

Didn't sell it to mick because I couldn't get the cranks off. He reckons that the BB spindle is too big for the crank, and that it's stuck on there now. They could definitely be removed in some way or another, but I'm not all that prepared to do it ATM.

Also, should probably be more clear when I say that the front wheel is a complete POS, ie, it's difficult to turn, not just rough.

Hence, I'm prepared to sell the frame/forks/BB/Cranks/C'ring together for €400, which is a solid price IMO, won't be taking offers on this.

If I can't sell it as a whole, I'll just drill the forks and use it more as a winter commuter or something with fatter tyres!

Cheers, and here's another quick flick of her in another carnation

it's mick

please don't drill those forks!! If you really feel the need then I could swap you for a pair that are already drilled (here they are on my bike).



Also, the frame, forks and cranks are very nice and would make a great bike for someone.

lovelyoner

it's mick wrote: »

please don't drill those forks!! If you really feel the need then I could swap you for a pair that are already drilled (here they are on my bike).



Also, the frame, forks and cranks are very nice and would make a great bike for someone.

I think I might cry. Have just put a hole in the front and rear of it FFS! Would have definitely swapped if I'd seen this sooner. Haven't completely drilled them through yet, give me a shout if in the off chance that you're still interested.



On another note, I appear to be hitting a bolt thats threaded into where the brake drilling would normally be. From what I've read, it's done in the Alpina factory and is threaded into the forks. Anyone have any experience drilling through it/getting it out?

r27

How much for just the dura ace front wheel then ? And is it a cartilage bearing front hub or loose ball ?

With them forks you drill from the back then unscrew the bolt as far as I know

MAntoD

it's mick wrote: »

please don't drill those forks!! If you really feel the need then I could swap you for a pair that are already drilled (here they are on my bike).



Also, the frame, forks and cranks are very nice and would make a great bike for someone.

Don't suppose you're (still) looking to sell this?

lovelyoner

Might 'swell bump this, anyone interested in FF+Cranks+C'ring+BB for ~€400? Offers welcome, just not silly ones!

lovelyoner

Another bump, FF+Cranks+Cring+BB+HS for <€400! Dura ace rear wheel also for sale for ~€150. Will do a deal on both. Offers are of course welcome.

Cheers, LO

lovelyoner

FF, etc. €380.

Wheel €140.

Squidgy Black

You aren't by any chance selling those risers are you?

kumate_champ07

stetyrrell wrote: »

You aren't by any chance selling those risers are you?

if hes not I have some black risers, 25.4mm and new. can cut them shorter if you want with a tube cutter so its a tidy job.

lovelyoner

stetyrrell wrote: »

You aren't by any chance selling those risers are you?

I'm not unfortunately, but it seems like you got sorted anyway!

lovelyoner

Any final offers before I close this up and advertise elsewhere?

lovelyoner

Still looking to shift this, FF etc. €365

Walshey96

Hi have you still got this? Would be interested in the rear wheel,cranks and bottom bracket if you still have them?

Idleater

Walshey96 wrote: »

Hi have you still got this? Would be interested in the rear wheel,cranks and bottom bracket if you still have them?

Would possibly consider the rest...

lovelyoner

Sorry for the phenomenally late reply, but yes I still have and am looking to sell this. If either of you are still interested just give me a shout!

randomstuff

lovelyoner wrote: »

Sorry for the phenomenally late reply, but yes I still have and am looking to sell this. If either of you are still interested just give me a shout!

So what's available then? And prices? Did you manage to get the cranks off of the BB? The crankset is a Dura Ace track one, 144bcd, correct? What brand/make is the chainring? Are the hubs loose ball bearings or cartridge?

I'd be interested in rear wheel and crankset.

Thanks.

lovelyoner

randomstuff wrote: »

So what's available then? And prices? Did you manage to get the cranks off of the BB? The crankset is a Dura Ace track one, 144bcd, correct? What brand/make is the chainring? Are the hubs loose ball bearings or cartridge?

I'd be interested in rear wheel and crankset.

Thanks.

Here's what's available;

Frame/fork/HS/BB-225
Cranks/chainring-125
Rear Wheel-140

Haven't managed to get the cranks off the bike myself, if I have a definite buyer then Ill bring it down to my LBS and get them removed. Cranks are Dura Ace 7600, 144BCD. Chainring is also DA, 48t and NJS stamped. The rear hub is cartridge bearing, DA 7710 low flange.

Cheers

diasfu

Hi, would you take 65e for the crank+chainring? Are you looking for some bike parts? I have few(saddle, handlebars, pedals..) Could trade..?

lovelyoner

diasfu wrote: »

Hi, would you take 65e for the crank+chainring? Are you looking for some bike parts? I have few(saddle, handlebars, pedals..) Could trade..?

Sorry, but 100% no. Prices are fairly final.

diasfu

lovelyoner wrote: »

Sorry, but 100% no. Prices are fairly final.

OK, glws..

randomstuff

If the crank doesn't want to come off, doesn't that mean the tapers will be shot, when you do eventually disassemble it from the bb?

lovelyoner

randomstuff wrote: »

If the crank doesn't want to come off, doesn't that mean the tapers will be shot, when you do eventually disassemble it from the bb?

It would indeed ruin them if you did an amateur hammer and tongs job. Which is why I said if I do get a definite buyer, Ill get the LBS to take them off to prevent any damage. I'm not asking for money up front either; if you think they're fooked you're not obliged to buy them.

randomstuff

lovelyoner wrote: »

It would indeed ruin them if you did an amateur hammer and tongs job. Which is why I said if I do get a definite buyer, Ill get the LBS to take them off to prevent any damage. I'm not asking for money up front either; if you think they're fooked you're not obliged to buy them.

Could you post a close up pic of them please? Thanks.

lovelyoner

randomstuff wrote: »

Could you post a close up pic of them please? Thanks.

Sorry that they're slightly poor quality. iPhone job.

randomstuff

How about 80 for the chainset? For your asking price, they are usually in very good condition. You don't seem to have the crank bolts also. Are the chainring bolts original Shimano or?

Pending that threads/tapers are in good condition.

Thanks.

lovelyoner

randomstuff wrote: »

How about 80 for the chainset? For your asking price, they are usually in very good condition. You don't seem to have the crank bolts also. Are the chainring bolts original Shimano or?

Pending that threads/tapers are in good condition.

Thanks.

No. Thanks

randomstuff

lovelyoner wrote: »

No. Thanks

So you wont be moving with price then? Or?

lovelyoner

Not really, sorry. I was offered £140 for cranks and BB not so long ago which I know is a bit OTT, but I'd definitely be looking at 150 odd quid on eBay. I'll let them go for 125, but no less.

Decided to advertise this elsewhere again with a bit more of a suitable audience; if anyone is still interested PM me.

Mods please lock this thread, thanks.

randomstuff

lovelyoner wrote: »

Not really, sorry. I was offered £140 for cranks and BB not so long ago which I know is a bit OTT, but I'd definitely be looking at 150 odd quid on eBay. I'll let them go for 125, but no less.

Decided to advertise this elsewhere again with a bit more of a suitable audience; if anyone is still interested PM me.

Mods please lock this thread, thanks.

How about 100?

lovelyoner

randomstuff wrote: »

How about 100?

Again, if it wasn't clear, no less than 125.

CramCycle

lovelyoner wrote: »

Again, if it wasn't clear, no less than 125.

MOD VOICE: Also, as said, now advertised elsewhere, thread locked.