M4 bits. \Set of rail covers.\ G3 optic mount.\ and 2 motors.\4 spring guides

Just a Plinker

More bits .

4 spring guides

1, Full metal balbearing one, The tip (4mm) is plastic 8 euro including standard postage

2, Plastic ones but the ends are metal, ballbearing, The pins at the end are round 12 euro for the two including standard postage

1 ,Plastic one with metal end 3 euro inluding standard postage

20 euro for the 4 inculding standard postage.

One set of 6 sand , Knights Armament rail covers set includes, 2 x 9 rib, 2 x 5 rib, and 2 x 2 rib.
25 euro including standard postage.

One metal G3 Grab optic mount,With claws and the 4 bolts, 10 euro including standard postage

Two standard A&K motors one long one short 12 euro for the two including standard postage, These were never used

A few M4/ M16 bits, One outer barrell, One abs carry handle, One post sight ( Without pins), One charging handle, One metal dust cover ( Locking mech works have the long pin for it but no spring) Two stock tubes one with a twistable round nut at the end and base cap, one with out base cap and the round Nut at the end is fixed ( No bolts or metal inserts), Two metal receiver end plates one full , One is half lenght with sling mount ( for fixed stock I suspect)

30 euro for the lot postage not included Will split if wanted

. Paymet by PayPal only ,(paypal fees paid by you please or money will be returned,) Cash if collected

Close up pics on request

http://pix.ie/plinker/album/450534

johnmc_carthy

Offer 5 for outer barrel by PayPal if splitting.

kubacx65

Is the charging handle metal? If so, I would take it for a 5 euro + shipping.

Just a Plinker

Hi John 5 plus postage is fine,I,ve added pics so you can have a look and see if it is what you need mate

johnmc_carthy wrote: »

Offer 5 for outer barrel by PayPal if splitting.

Just a Plinker

Hi kubacx it is metal, And 5 is grand , I'v now added pics so you can see if it is what you need mate



TE=kubacx65;80766039]Is the charging handle metal? If so, I would take it for a 5 euro + shipping.[/QUOTE]

kubacx65

Perfect, PM sent.

Mando Commando

Hi, offer asking on the G3 mount.

Just a Plinker

Accepted Mando Fire be a pm

Mando Commando wrote: »

Hi, offer asking on the G3 mount.

Mando Commando

Will do, cheers

Just a Plinker

bump

Just a Plinker

Bump

Just a Plinker

bump

stephan7527

What's left

Just a Plinker

Hi Stephen everything except the G3 mount and the charging handle pal

stephan7527 wrote: »

What's left

Just a Plinker

bump

zerohamster

The m16 outer barrel still available, will match the last offer

Just a Plinker

Hi pal outer barrell still here but it is just the barrell have a look at the pic of it to make sure it is what you want my friend,

http://pix.ie/plinker/album/451391

zerohamster wrote: »

The m16 outer barrel still available, will match the last offer

zerohamster

Have a kwa m4 standard length so if I can use this outer barrel and the parts I have (I have a long handguard) plus a longer inner could this make an m16 length gun?

Just a Plinker

zerohamster wrote: »

Have a kwa m4 standard length so if I can use this outer barrel and the parts I have (I have a long handguard) plus a longer inner could this make an m16 length gun?

I don't think so pal, if you plan on putting a post sight on it you will only have about 155mm from the delta ring assembly, You will also need the part that goes into the receiver for it , I can't find it lol, So a standard lenght M4 A1 fore grip is all you will fit on to it, I'll send it up to you to have a look at if you want if it does not fit you can send it back

zerohamster

Just a Plinker wrote: »

I don't think so pal, if you plan on putting a post sight on it you will only have about 155mm from the delta ring assembly, You will also need the part that goes into the receiver for it , I can't find it lol, So a standard lenght M4 A1 fore grip is all you will fit on to it, I'll send it up to you to have a look at if you want if it does not fit you can send it back

Just realised that it was an m4 length barrel not and m16 so no worries and best of luck with the sale

Just a Plinker

bump

zerohamster

Just realised that I actually do need an M4 barrel as the little project I am doing would involve an m16 handguard over an m4 barrel and I would need to file a slot in the barrel for the gas block to fit to keep that handguard in place so I think I will actually take it if you want to go to PM's?

Sorry for the time wasting :S

Just a Plinker

No problem mate to pm's

zerohamster wrote: »

Just realised that I actually do need an M4 barrel as the little project I am doing would involve an m16 handguard over an m4 barrel and I would need to file a slot in the barrel for the gas block to fit to keep that handguard in place so I think I will actually take it if you want to go to PM's?

Sorry for the time wasting :S

stephan7527

where do you live

Just a Plinker

South Kilkenny/ Waterford area mate

stephan7527 wrote: »

where do you live

Just a Plinker

bump

Just a Plinker

bump

Just a Plinker

Rail coveres now sold

Just a Plinker

bump

Just a Plinker

bump

Just a Plinker

bump

Just a Plinker

Stock tubes withdrawn

riggsfitz

offer 4 including postage for dust cover

Just a Plinker

Accepted mate to pm.s

riggsfitz wrote: »

offer 4 including postage for dust cover

Just a Plinker

bump

SYDEWYNDER

Is the spring guide VSR compatible?

Just a Plinker

No mate they are aeg spring guides, My bad should have said so on the thread sorry!!

SYDEWYNDER wrote: »

Is the spring guide VSR compatible?

Just a Plinker

Mods please mark as sold