Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Uncommitted switch problem

  • 06-09-2012 7:02pm
    #1
    bodonnell
    Registered Users, Registered Users 2 Posts: 565 ✭✭✭


    Installed a 80cm dish & mono lnb for 13 & 19e. Tuned in both sats with signals in the 80's & quality in the high 90's. I wanted a feed from my sky dish on this receiver also so connected the mono & sky feed to an uncommitted diseqc switch. Now I get 'no signal' when trying any channel on 13 or 19 but sky is working fine. Box is azbox prem+.
    Any suggestions appreciated. Probably overlooking something in diseqc settings!


Comments

  • #2
    Apogee
    Registered Users, Registered Users 2 Posts: 3,855 ✭✭✭Apogee


    Are you using native firmware or something e2 based?

    Link of interest:
    http://www.satpimps.com/showthread.php?118660-Problem-with-Azbox-and-Diseqc-1-1


  • #3
    downwiththatsor
    Registered Users, Registered Users 2 Posts: 915 ✭✭✭downwiththatsor


    bodonnell wrote: »
    Installed a 80cm dish & mono lnb for 13 & 19e. Tuned in both sats with signals in the 80's & quality in the high 90's. I wanted a feed from my sky dish on this receiver also so connected the mono & sky feed to an uncommitted diseqc switch. Now I get 'no signal' when trying any channel on 13 or 19 but sky is working fine. Box is azbox prem+.
    Any suggestions appreciated. Probably overlooking something in diseqc settings!

    How have you setup 13e & 19e in Antenna Setup? Have you correctly assigned the diseqc ports they are connected to?


  • #4
    bodonnell
    Registered Users, Registered Users 2 Posts: 565 ✭✭✭bodonnell


    Apogee wrote: »
    Are you using native firmware or something e2 based?

    Link of interest:
    http://www.satpimps.com/showthread.php?118660-Problem-with-Azbox-and-Diseqc-1-1
    Native 0.9.5402


  • #5
    bodonnell
    Registered Users, Registered Users 2 Posts: 565 ✭✭✭bodonnell


    downwiththatsor wrote: »
    How have you setup 13e & 19e in Antenna Setup? Have you correctly assigned the diseqc ports they are connected to?

    The monoblock is connected to 'lnb 1' on the diseqc switch which is what they are assigned to in the setup. I have tried to reverse the command order to 'uncommitted/Commit' in the diseqc setup but it will not save this option.


  • #6
    Apogee
    Registered Users, Registered Users 2 Posts: 3,855 ✭✭✭Apogee


    bodonnell wrote: »
    The monoblock is connected to 'lnb 1' on the diseqc switch which is what they are assigned to in the setup. I have tried to reverse the command order to 'uncommitted/Commit' in the diseqc setup but it will not save this option.

    If the Sky LNB is on port 2 of the uncommitted switch, and Sky is all that's available, then some switching is going on - in the absence of a Diseqc signal, the switches tend to default to whatever's on port 1.

    What happens if you swap the cables around on the uncommitted switch?

    Another link here:
    http://www.satpimps.com/showthread.php?108377-Full-Diseqc-1-1-is-working


  • Advertisement
  • #7
    bodonnell
    Registered Users, Registered Users 2 Posts: 565 ✭✭✭bodonnell


    Okay got it sorted, did'nt have diseqc setup properly, a few adjustments & all are working. Ta for replies


Advertisement