Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Tight headset

  • 27-08-2012 3:39pm
    #1
    Muckers
    Registered Users, Registered Users 2 Posts: 504 ✭✭✭


    I've an integrated headset which I changed recently due to the lower bearing being worn. It's a genuine Kuota headset, but having replaced it, it doesn't feel as free as it should while rolling the bars side to side while the front wheel is off the ground. I used grease when changing it. It feels about 90% right, but i'm not completely satisfied with it. Any ideas?


Comments

  • #2
    biketard
    Registered Users, Registered Users 2 Posts: 542 ✭✭✭biketard


    Muckers wrote: »
    I've an integrated headset which I changed recently due to the lower bearing being worn. It's a genuine Kuota headset, but having replaced it, it doesn't feel as free as it should while rolling the bars side to side while the front wheel is off the ground. I used grease when changing it. It feels about 90% right, but i'm not completely satisfied with it. Any ideas?

    Did you tighten the cap down too hard before you tightened the stem maybe?


  • #3
    Muckers
    Registered Users, Registered Users 2 Posts: 504 ✭✭✭Muckers


    No I made sure not to overtighten anything. Maybe it will free out a bit with use.


Advertisement