Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Stripping paint from melamine

Options
  • 25-07-2012 12:36pm
    #1
    Registered Users Posts: 247 ✭✭


    I have a fitted wardrobe and the doors are made from melamine or formica, I am not sure which. But it is the same sort of synthetic finish you see on kitchen cabinet doors, i.e. shiny. The previous house owner painted these doors and I guess he must have used a specialised undercoat to enable the gloss overcoat to stick.

    Rather than add another coat of paint I would like to restore the doors to their original condition as they would then blend in with the room decor. Is it possible to strip the paint without damaging the surface of the doors? I have looked at various paint strippers but these seem to be designed for natural surfaces like wood or stone.

    If anyone has had experience of this sort of thing I would love some tips.

    Thanks.


Comments

  • Banned (with Prison Access) Posts: 7,771 ✭✭✭michael999999


    The problem you have is them doors are probably veneered, so if you put any kind of strippers on them they will probably peel!

    Your best bet is to sand and re paint. A couple of coats of satinwood will do the trick.


  • Registered Users Posts: 247 ✭✭Sanguine Fan


    The problem you have is them doors are probably veneered, so if you put any kind of strippers on them they will probably peel!

    Your best bet is to sand and re paint. A couple of coats of satinwood will do the trick.

    Thanks for that. I was hoping I could avoid adding more paint but I think you're right about the effect of the paint strippers.


  • Banned (with Prison Access) Posts: 15,858 ✭✭✭✭paddy147


    I have a fitted wardrobe and the doors are made from melamine or formica, I am not sure which. But it is the same sort of synthetic finish you see on kitchen cabinet doors, i.e. shiny. The previous house owner painted these doors and I guess he must have used a specialised undercoat to enable the gloss overcoat to stick.

    Rather than add another coat of paint I would like to restore the doors to their original condition as they would then blend in with the room decor. Is it possible to strip the paint without damaging the surface of the doors? I have looked at various paint strippers but these seem to be designed for natural surfaces like wood or stone.

    If anyone has had experience of this sort of thing I would love some tips.

    Thanks.


    Take the doors off and change them.

    You will pick up a set of wardrobe doors on the cheap,over on Donedeal and Adverts.ie.;)


Advertisement