How to work self fill on jarmet sprayer

redzerologhlen

Can anyone enlighten me on this, spent a half an hour arsing with it and couldnt get it going. Its a new sprayer and hasnt been used before.

grange mac

when i first got mine, spend half the day trying to work your problem...eventually worked out that it was not a self fill afterall...that costs an extra €100 on the 450l sprayer I bought:mad:

redzerologhlen

grange mac wrote: »

when i first got mine, spend half the day trying to work your problem...eventually worked out that it was not a self fill afterall...that costs an extra €100 on the 450l sprayer I bought:mad:

I ordered the self fill and paid the extra 120 euro

grange mac

well enjoy your evening trying to work it out

Farmer Pudsey

I am working from memory longer arm of red handle is pointed in. After that there are only two adjustments I think you leave the agitator switch on ( leaver that causes pipe through top to spray) and pump in reverse. If you pressure is low rise it with red handle but remember to mark your setting for spraying. You also increase the tractor revs you do the same if you are agitating the mix.

The two you will have to cahnge are the agitator switch and the on/off for the pump.

By the way I paid 75 euros for mine and it is a 300 litre tank

FixItAginTomora

Turn Control Handle Anti-Clockwise; does not matter about nozzle controls, but they need to be off and the 4th one "on" for agitation. Where you attach the suction ipe you turn the handle around all the way to "face" the suction hose (left). For spraying it should be facing the filter (right)