ABS KWC G17 Part

DJDylan106

Right lads, someone might be able to help me, i have a fully plastic KWC G17. Heres the story, i bought this gun in Main Irish Airsoft about 2 years ago for a friend, a bb got jammed in it and my friend ( with no internal knowledge ) opened the gun up and springs went flying everywhere and parts falling on the floor and all that crack but he managed to get all the parts and put them in a bag and gave them to me. I reassembled the gun due to my G17 internal knowledge and was missing a little spring, it turns out it is the little spring in the mechanism that resets ( excuse my term ) the little thing that presses on the back of the mag and releases the gas. I cannot seem to get my hands on one of these little springs, i went back to MIA and with both Tony and Chris being very helpful, told me that KWC no longer supply these little springs so i was hoping that maybe one of ye out there might have an old KWC G17 for parts or maybe that would know of someone who supplys these springs. Hope to get pics up soon for a better understanding and i hope that one of my fellow airsofters could help me. .

thermo

can you see it on the above??

DJDylan106

thermo wrote: »

can you see it on the above??

I actually cant due to the fact that this G17 that i have has a weird mechanism to normal G17s ( like above ), the top slide does not just slide off, you must literally pull it off by the sides, then the full mechanism is just one big piece that just slides out of the body of the gun and is only held in by a pin and a screw. I have 3 more G17s and none of them have even close the mechanism of this problematic one. I hope to get pics up either tomorrow or tuesday to try and show you what i mean.

MrTime

thermo

would that diagram be similar to ARMY ARMAMENT glock 17 ( or R17)

cant find that bbkiller site

also cant find any site for Army armament

does anybody know about parts compatability for army armament?

DJDylan106

DJDylan106 wrote: »

MrTime wrote: »

thermo

would that diagram be similar to ARMY ARMAMENT glock 17 ( or R17)

cant find that bbkiller site

also cant find any site for Army armament

does anybody know about parts compatability for army armament?

I also have an army armament r17 and one thing i know is that they are compatible with Tokyo marui parts if that's any help to ya. :-) as for they're being a website for them, they're just a chinese manufacturer, and distribute through airsoft retailers, so you'll have to go to them. And As for not being able to find the diagrams, you should try tokyo marui diagrams as the armament ones are just copies of the marui ones. Hope this was a bit of help to you mate. ;-)

MrTime

thanks for that

Inari

MrTime wrote: »

thermo

would that diagram be similar to ARMY ARMAMENT glock 17 ( or R17)

cant find that bbkiller site

also cant find any site for Army armament

does anybody know about parts compatability for army armament?

That diagram is for the KSC/KWA series of glocks and is NOT compatible with the Army Armament. The Army Armament are only compatible with the TM series of glocks

thermo

DJDylan106

Now lads i took a few pics finally to try and explain what my problem is with this part i have put it in steps of disassembly to show the difference between this and the normal mechanism of a glock. I know, its A LOT OF STEPS. But please take the time to look and maybe help me.

Step 1 :http://flic.kr/p/ciR3Tf
Step 2 :http://flic.kr/p/ciR46Y
Step 3 :http://flic.kr/p/ciR4iS
Step 4 :http://flic.kr/p/ciR5bo
Step 5 :http://flic.kr/p/ciR5oE
Step 6 :http://flic.kr/p/ciR5zY
Step 7 :http://flic.kr/p/ciR5MW
Step 8 :http://flic.kr/p/ciR5YS
Step 9 :http://flic.kr/p/ciR6fW
Step 10:http://flic.kr/p/ciR6tQ
Step 11:http://flic.kr/p/ciRhjQ
Step 12:http://flic.kr/p/ciR6Vm
Step 13:http://flic.kr/p/ciR79f
Step 14:http://flic.kr/p/ciR7nh
Step 15:http://flic.kr/p/ciR7As
Step 16:http://flic.kr/p/ciR7Qu
Step 17:http://flic.kr/p/ciR88w

Thanks lads, hope yous can help. :cool:

DJDylan106

Anybody have any idea??

DJDylan106

Bump