ARITECH CS-350.

realplayer · 2012-06-06 12:19:10

My house alarm is an ARITECH CS-350 (DK 3403). It was installed around June 2000. It has worked very well. For last 3 months I was getting a 'low battery' alert. A couple of nights ago there was an ESB outage here in Clonsilla, the alarm sounded and I entered the disarm code and it stopped ringing. The power came on and…

06-06-2012 12:19PM

#1

realplayer

Registered Users, Registered Users 2 Posts: 8 ✭

Join Date: January 2012

Posts: 4

My house alarm is an ARITECH CS-350 (DK 3403). It was installed around June 2000. It has worked very well. For last 3 months I was getting a 'low battery' alert. A couple of nights ago there was an ESB outage here in Clonsilla, the alarm sounded and I entered the disarm code and it stopped ringing. The power came on and then off again. I re-entered the disarm code and this time it would not stop ringing. As it was the middle of the night I had to stop the ringing, so I removed the panel cover and pulled out a small electrical plug from the panel. The noise stopped.

The next morning with the power back on I put the plug back in place and tried to arm the system but failed. I kept getting the message displayed 'open zone(s)' and 'cabinet tamper'. I have the original engineer's code, but nothing I do will let me re-arm the alarm. Any suggestions would be appreciated.

0

Comments

#2 06-06-2012 12:32PM

Spear

Moderators, Computer Games Moderators, Technology & Internet Moderators, Help & Feedback Category Moderators Posts: 26,603 CMod ✭✭✭✭

Join Date: September 2001

Posts: 24112

Try the home security forum instead:

http://www.boards.ie/vbulletin/forumdisplay.php?f=1366

0