If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Stock tube wire harness replacement.

Southern Dandy · 2012-04-10 22:51:34

Howdy, the wire harness in my kwa is driving me nuts its like a pigs tail and getting lipos in/out would be much easier if the wiring wasnt so coiled, so my idea was to separate the existing harness at the spade connection in the stock tube and then use silicon insulated copper cable (i think it might be nickel plated)…

10-04-2012 10:51PM

#1

Southern Dandy

Registered Users, Registered Users 2 Posts: 2,006 ✭✭✭

Join Date: December 2007

Posts: 1887

Howdy, the wire harness in my kwa is driving me nuts its like a pigs tail and getting lipos in/out would be much easier if the wiring wasnt so coiled, so my idea was to separate the existing harness at the spade connection in the stock tube and then use silicon insulated copper cable (i think it might be nickel plated) which i can get from my electrical wholesaler.

I think the closest size to awg 16 is 1.5mm as awg 16 is 1.3mm if i is not mistaken, so Im wondering has anybody done this or am i missing something here and could in turn melt the harness .

0