Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Setup Dimplex Control panel for storage heating

  • 09-02-2012 07:30PM
    #1
    sandair
    Registered Users, Registered Users 2 Posts: 5 ✭


    Hi,

    I recently moved into a new apartment and it's got a 2 zone dimplex power wire controller, details here http://www.dimplex.co.uk/assets/product_instructions/RX01006PW_Two_Zone_Programmer.pdf
    There are two radiators connected to it and have a temperature display (looks like a wifi strength indicator) with a plus and minus button. There are two power buttons for each radiator. When one is pressed the radiator gives instant heat which can be controlled with the plus and minus buttons but when the other button is pressed nothing happens so I'm assuming that that is for storage heating.
    My question is really, does anybody have a similar setup and if so how do you use the controller to set when the heaters start collecting heat at night and when to output the heat. The instructions talk about comfort and setback and I'm not sure what that means, plus the temperature display on the radiators is not on for me to set the output temperature when in storage mode. I tried just putting the controller to auto but the heaters seemed to turn on (storing heat I'm assuming) around 8pm which is a bit early for storage heating I'd imagine since it's not using night saver electricity. Any help would really be appreciated.


Advertisement