Triax tr112 Saorview box changing channels

oscaroscar

Hi All,
Im hoping someone in Boards.ie land can help.
I recently bought a Triax tr112 digital reciever saorview box which wasnt a problem to set up but its switching channels without any interaction from me. This isnt happening all of the time and seems to be very random but is most annoying.
I have powered the unit down, unplugged the hard drive thats connected to it but it continues to happen.
Any thoughts/ideas would be great.

Thanks

chalicetree

Sorry to resurrect this but I have had the exact same problem and was wondering if you or anyone else has found a solution. We have read the manual back to front but I'm obviously missing something.

Kristopherus

You would have a better chance of getting an answer if you posted this in the Terrestial forum.

chalicetree

Thanks I'll try that

icdg

Moved to Terrestrial.

Digital Satellite TV

you could try the latest firmware from Jan 2012

available at http://www.triax.co.uk/upload/tr112_software_release_web_january_2012_001.zip

Make sure to follow the instructins carefully and only use the one from the link I provided. The file is zipped on the link so you'll need to unzip first and copy the necessay file to a blank USB drive.

instructions are as follows....

1.Format USB Stick to FAT32

2.Load latest Software on to the USB stick, Unzip if necessary (the file you are looking for is called pesi_ireland_xxxxxxx.bin, it's a couple of folder down inside the zipped file)

3.Power up the TR112 Receiver

4.Insert the USB stick fully into the slot located at the back of the TR112 receiver.
wait approximately 5 seconds, You will see a message saying "Has found storage device".

5.Press Menu on the remote Control, goto "Setting", "Upgrade"

6.Select "USB Upgrade" and press Enter, Locate the upgrade file on the USB Stick (.bin),
then press Enter.


DO NOT SWITCH OFF OR REMOVE USB STICK

This will take approximately 3 mins.

7.The TR112 Receiver will restart, you can now remove the USB stick and retune the TR112 Receiver.

Hope that helps you

kerryman

I have had the same problem so the solution that works for me is to do a factory reset after you do your first install and the re tune.

elgan

hi Digital Satellite TV,

Do you have a link for the updated flash, the current one has expired. The combo box has lost all the satellite channels.

steveon

elgan wrote: »

hi Digital Satellite TV,

Do you have a link for the updated flash, the current one has expired. The combo box has lost all the satellite channels.

the TR212 is a saorview only box

tr114 is the combo box...I can email you a channel list for the 114 you will simply need to add your saorview channels for your area unless same as me in Limerick we use ch 44 and 47 for saorview