Range Rover steel wheels.

Bumpstop

I have googled this to death to no avail. Maybe someone has the ansewer. I am looking for a set of white 8 spoke steel wheels 16X7 in P38 Range Rover fitment ie pcd 5X120. I cannot seem to find anyone who supplies this size.


I have seen Discovery 2s with them so they must exist.

a 16X8 might do, but they might stick out too much.
any ideas ?

ubs69

put up a pic can you ? try www.jsf4x4.co.uk

101sean

WTF would you want white 8 spokes on a P38?!

Have you tried Silverline, Paddocks, Craddocks, Tyresdirect as well as the link ubs69 suggested?

I doubt whether there's much demand for aftermarket steel rims in P38/D2/3/4 etc sizes. There is an OEM steel rim similar to the wolf rim and Matt Lee probably does a Mach 5 rim to suit. Both are going to be far stronger than an 8 spoke or modular rim. I think you can also get adaptors to fit earlier rims to later hubs.

Bumpstop

well, the white 8 spoke, trackers, I think they were called, have a deep dish, and just give a more rugged look. The P38 with alloys does suffer a little Chelsea tractor look. Aw come on how long do you expect me to drive stock.

101sean

Note to self, do not reply to posts when getting in from pub gone 2am

Didn't mean to be rude about your choice!

Know what you mean though, I'm thinking of changing from alloys to black Wolf rims on the 110.

I don't know what offset the D2 steel rims have although they do look similar. Otherwise you'll just have to keep looking

Bumpstop

Lol don't sweat it 101 been there have the tee shirt. I'm not sure how they would look myself. I used to have a swb Trooper aweful yoke, but I threw a set of 15 by 8 white spokes on her and a wheel arch extension kit. It looked excellent right untill the wife rammed it into a wall:rolleyes:.

So it might be worth a shot on the Rangie.
Btw I have been restoring a series 2a now for about 2 years, it's almost finished I must post up some pics. I hope to get it on the road this summer, I just need to find the time.
The recession has made 2a prices so low I should have just waited and bought a restored one.

rrv8

Been thinking the same myself recently about fitting steel wheels , just to make it look less blingey .I was thinking black modulars

http://www.johncraddockltd.co.uk/categories/steel_wheels241.php?brandid=15

http://www.paddockspares.com/land-rover-wheels-and-tyres/steel-wheels/disco-2-aftermarket-steel-wheels.html

McP2011

Any pic's of the style you are looking for?...i might have some.

Bumpstop

http://www.johncraddockltd.co.uk/products/jc129_white_spoke_wheel_7_x_16.php

Or at a push these but in white.

http://www.johncraddockltd.co.uk/products/jc8010_8x16_silver_steel_wheel_disco_2_and_p38_25_offset_use_wheel_nut_anr4851ng_.php

I think 7 by 16 would be the best fitment.

McP2011

Ill check to see what I have and ill Pm you.