Whirlpool washer wont turn off

clickypiggy · 14-12-2011 1:26am #1

its an AWZ 510 washer/dryer, its had this problem since we moved in (came with the appartment) it washes the cloths fine but wont let me reset it or turn it off, dont know how i do it other times, its just lucky mashing of buttons and settings and i cant find anything on the 1 sheet of paper manual about what to do. Anybody else have 1 of these and know what to do?

clickypiggy · 14-12-2011 6:26pm

still cant reset it, this is getting annoying now

Peter Rhea · 14-12-2011 11:00pm

According to this manual, you 'Reset by turning the programme selector to "Off/0" and select the "Drain Spin" programme to remove the water remaining in the bowl before the door can be opened'.

clickypiggy · 15-12-2011 8:36am

Peter Rhea wrote: »

According to this manual, you 'Reset by turning the programme selector to "Off/0" and select the "Drain Spin" programme to remove the water remaining in the bowl before the door can be opened'.

but i can open the door fine and theres no water left as i use the dryer, i just cant reset it so i can use it again

Peter Rhea · 15-12-2011 12:31pm

I'm not sure I understand you 100% here: what needs to be reset?

Do you mean you can't turn the programme selector?

clickypiggy · 15-12-2011 11:43pm

Peter Rhea wrote: »

I'm not sure I understand you 100% here: what needs to be reset?

Do you mean you can't turn the programme selector?

no, i can turn the knob thing fine but the machine itself wont turn off thus not letting me start a new wash cycle, the light is just stuck on "end" just telling me its finished but wont let me do anything else

Peter Rhea · 16-12-2011 2:24pm

Are any of the red indicator lights on the right hand side lit?

Lowerist · 15-07-2012 7:38pm

Did you manage to resolve this issue? Same thing has happened to mine and I had tried loads of things! Any help would be appreciated!

ellewood · 24-08-2012 4:16pm

the swich behind the timer dial knob is faulty and is not swiching progs when u are turning it as it should if u can take it out it can be repaired or else get a new swich for it

Anonymmon · 21-05-2015 8:46pm

ellewood wrote: »

the swich behind the timer dial knob is faulty and is not swiching progs when u are turning it as it should if u can take it out it can be repaired or else get a new swich for it

Or, try what I just did. I was having the same issue, aka Persistent "End" led.
Open the door, open the Soap compart. Leave the machine set to a program (i think any would work). If you leave it for +-5 mins, you'll hear a "click" (assuming ur switch is ok). When it you heard that click, set the knob to Off, It should restart normally.
Hope it helps,
--

Anonymmon · 21-05-2015 8:47pm

ellewood wrote: »

the swich behind the timer dial knob is faulty and is not swiching progs when u are turning it as it should if u can take it out it can be repaired or else get a new swich for it

Or, try what I just did. I was having the same issue, aka Persistent "End" led.
Open the door, open the Soap compart. Leave the machine set to a program (i think any would work). If you leave it for +-5 mins, you'll hear a "click" (assuming ur switch is ok). When you hear that click, you're cool to set the knob back to "Off", that should restart normally.
Hope it helps,
--

Whirlpool washer wont turn off

Comments