Info Required

jimeryan22

Hi lads , recently thanks to this forum have swapped 2 previously bought guns with 2 different chaps for 2 new guns of which i more like....
yous know yourselves..
Bassically now i want INFO so i can go to town upgrading them..
one's a jg aug a2... and the others a g36, not sure what make..


any links appreciated or whatever, the taking them apart,maintaining,and putting back together is handy i find, its just knowing what internals i can get.... thanks...

oh and sos to the moderators if this post is in the wrong place..

Jayo123

stick a high speed motor in it and use a 9.6v battery, double drum mag with a grip, it would look pretty nice

Airsofter01

jimeryan22 wrote: »

Hi lads , recently thanks to this forum have swapped 2 previously bought guns with 2 different chaps for 2 new guns of which i more like....
yous know yourselves..
Bassically now i want INFO so i can go to town upgrading them..
one's a jg aug a2... and the others a g36, not sure what make..


any links appreciated or whatever, the taking them apart,maintaining,and putting back together is handy i find, its just knowing what internals i can get.... thanks...

oh and sos to the moderators if this post is in the wrong place..

For the JG AUG A2, I don't think there is any need to upgrade the internals at the moment. I think you can even use it with 0.25 BBs. Will probably shoot better. & hoping the auto thing is fixed.

You can try HRTA. Some guys there know the internals. You may workout a deal with them.

Mister TETRA

You could also try Vacant. They have a Tech guy on staff that shows you how to do the basics.

What kinda upgrades were you thinking about buddy. Higher rate of fire? Longer range?

jimeryan22

Yeah thats more what im thinking alright... faster more accurate better range... anything i can do that will improve, without putting the guns over the mark...

i dont know, nozzles,gears,tubes... as i said taking apart, i dont need tips... would do them with my eyes closed... dont need techies


thanks lads

Mister TETRA

Do you know what FPS it is at now. TBB give better grouping and bigger battery or hi speed motor will increase your rate of fire.

SonofMoses

This is the wrong forum lads. Move it to questions. :-)

jimeryan22

not sure of fps yet... havent had chance to test yet..
whats tbb for the better grouping...?

richieffff

jimeryan22 wrote: »

not sure of fps yet... havent had chance to test yet..
whats tbb for the better grouping...?

A TBB is a Tight Bore Barrel, stock barrels tend to be 6.08mm in diameter, tightbores can be between 6.05-6.00mm.
There is no "best" diameter but 6.03 is a popular choice.
And better grouping is where the shot to shot consistency, i.e the spread of the bbs, improves to become tighter; this is an improvement to accuracy.

A good quality tightbore, that's not too expensive would be the Madbull Black Python 6.03mm barrel. It's available from a number of shops but the ones I know sell it are SE Airsoft and HobbyAirsoft(In shop not online, I think).

Also depending on your set up a tightbore barrel may increase your fps from anywhere between 5-20 fps.

Lemming

richieffff wrote: »

A TBB is a Tight Bore Barrel, stock barrels tend to be 6.08mm in diameter, tightbores can be between 6.05-6.00mm.
There is no "best" diameter but 6.03 is a popular choice.
And better grouping is where the shot to shot consistency, i.e the spread of the bbs, improves to become tighter; this is an improvement to accuracy.

to add to this, the diameter of TBB you pick may have a knock-on effect on what brands of BB you can or cannot typically use. Each tends to have varying diameter tolerances. You'll encounter more issues the smaller diameter you use, but 6.03 as said, seems to be a happy medium for most.