Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

On One Pompino Frame + Forks 54cm

Comments

  • Closed Accounts Posts: 1 Dubfan2011


    Hi, I'd be interested in some photos. Is there any time left on the frame warranty? Their sizing guide suggests a 54cm is large (5'11''). Would have expected medium. I'm 5'9'', so frame probably too big. What's your experience? Thanks


  • Closed Accounts Posts: 503 ✭✭✭JonDoe


    Hi Dubfan,
    It's a large, no warranty, I've got no receipts. It's steel and hasn't been "cold set" (bent) or anything. Size wise, I'm 5'10" and to be truthful it was right on the verge with a 100mm stem, the drops I was using had a longish reach too. With the right stem and bars I'm sure it would work . If you were planning a flat bar, I'd say it'd be spot on. I'll root it out tonight and should have some pics posted tomorrow.


  • Closed Accounts Posts: 503 ✭✭✭JonDoe


    in the geometry section here
    http://www.on-one.co.uk/i/q/FROOP/on_one_pompino_frame
    it's measurements are listed under 18" (on-one can't label stuff sometimes), the centre to top of seat tube is 540mm so centre to centre is about 2" less (what ever that is in mm), actual top tube length is 22" from memory but effective is 21.2" ish


  • Closed Accounts Posts: 503 ✭✭✭JonDoe


    Photo's here
    http://s839.photobucket.com/albums/zz311/Bikes999/pompino%20frame/
    apart from axle marks on the dropouts and very minor chips on rear of the forks, paint is very clean.


Advertisement