7.4v 4400mAh 20C Li-Po

Jelly 292

7.4v 4400mAh 20C Li-Po for sale/trade, Boxed, Deans.

Works perfectly, lasts for ever. Was keeping this for another project but changed my mind and this does not fit anywhere now.
Quick sale -€25 + P&P

Will Swap for 7mm V2 Gearbox Shell or a quality set of Hi Torque gears.

http://imageshack.us/g/714/dscf1168.png/

DeBurca

What is the size of the battery in Millimetres please

I have an 8mm gearbox shell here if the size is right

Jelly 292

126mm x 45mm x 15mm

Would you have any bushings with the GB? I have 7mm bearing bushings sat here, hence the 7mm preferance!

DeBurca

Jelly 292 wrote: »

126mm x 45mm x 15mm

Would you have any bushings with the GB? I have 7mm bearing bushings sat here, hence the 7mm preferance!

I may have 8mm bushing here someplace, let me check and get back to you soon

DeBurca

I have a set of 8mm brass bushings here that I took from a raider gearbox that cracked
Are your 7mm Bearings or Bushings ???????

Jelly 292

I got some 7mm bushings with bearings in them from the gearbox I just cracked so Im after a 7mm gearbox ideally so I can put these to use.
What brand is the GB shell?

DeBurca

Jelly 292 wrote: »

I got some 7mm bushings with bearings in them from the gearbox I just cracked so Im after a 7mm gearbox ideally so I can put these to use.
What brand is the GB shell?

Its a AIM TOP, I got it here a while back from LeftyFlip
I would not be a fan of reusing Bearings
I would have no problem reusing Bushings, after checking them first

Private Snafu

I've a brand new boxed set of SHS 32:1 high torque gears here, also have 7mm gearbox shells if you'd rather one

Jelly 292

You lost me there buddy, for whats its worth I just got a set of these:

http://www.ebay.ie/itm/110733595227?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

And I just wanna dump them in a replacement shell as my G&P GB shell just failed. So therefore Id like a 7mm GB shell.

Gimme a day or two and Ill see how advert goes and Ill give you a shout of you are still up for it.

Jelly 292

Hi lperrozzi,

Ill do a straight swap for those new gears?


Cheers

DeBurca

http://www.ebay.ie/itm/110733595227?...84.m1439.l2649


I know the add on eBay says BEARINGS BUSHINGS but they are Bearings or to be more exact I should say Ball Bearings and as I said before I would caution against reusing them especially is they were in a gearbox that cracked

Jelly 292

I know the add on eBay says BEARINGS BUSHINGS but they are Bearings or to be more exact I should say Ball Bearings and as I said before I would caution against reusing them especially is they were in a gearbox that cracked

Thanks man, Ill keep that in mind. Im pretty sure the shell cracked cause I was messing around with a metal piston head and a 11.1v, wont be doing that agian!
Thanks agian, if lperrozzi's gears dont come through Ill be back.

Private Snafu

No bother mate were abouts are you based?

Jelly 292

Im up Sligo, to PM's?

Private Snafu

No bother mate!