Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Dead.....morco feb-24 combi

  • 21-04-2011 8:55pm
    #1
    Registered Users, Registered Users 2 Posts: 2,842 ✭✭✭


    Hi Chaps, Assistance required.

    I have a morco feb 24E LPG combi fitted in a mobile home, it has power coming in onto the PCB, but it does nothing, no lights no sounds, timer on constant, nothing, hot tap running, nothing.
    These combi's have the self diagnostic system that show flashing lights, but the user manual says nothing about no flashing lights and i can't seem to find a service/installation manual with a fault finding guide, what am i missing ?? any idea's??


Comments

  • Posts: 0 [Deleted User]


    It look's like it's going to tell if it's a major component and if it was something like a stuck APS then you should still have lights, I would check polarity, board fuse's, but that board sounds shagged


  • Registered Users, Registered Users 2 Posts: 1,632 ✭✭✭heinbloed


    .....show flashing lights, but the user manual says nothing about no flashing lights and i can't seem to find a service/installation manual with a fault finding guide, what am i missing ?? any idea's??

    You're certainly missing expertise (smiley).
    No DIYers on gas installations!


  • Registered Users, Registered Users 2 Posts: 2,842 ✭✭✭Billy Bunting


    I would check polarity, board fuse's, but that board sounds shagged

    Agree Gary, checked polarity and that's fine, no fuses on the board but a 13A in the spur :eek:
    You're certainly missing expertise (smiley).
    No DIYers on gas installations!

    We don't all proclaim to be know it alls, and this DIYer can give my RGI number on request, unlike some smart fu**ing know it alls.


  • Registered Users, Registered Users 2 Posts: 2,790 ✭✭✭slavetothegrind


    pop out the pcb and see if you can see any blackened bad joints.

    a bad connection into it would overheat and break a solder joint.

    don' think they are too expensive if cant be repaired

    oh and don't mind heinbloed, he's a pal of yoshy's and means well :-)


Advertisement