If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)

Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Problem with a Beko Tumble dryer

Darsad · 2011-02-16 20:19:39

Hi I have a Beko / flavel TD162 W dryer . The belt broke so I replaced it yesterday , however when i opened it the drum was actually seized so I thought the back bearing but no it was fine . The front of the drum that runs on plastic with a felt seal was actually where it was seized , I removed the drum and when I refitted…

16-02-2011 8:19pm

#1

Darsad

Registered Users, Registered Users 2 Posts: 679 ✭✭✭

Join Date: August 2008

Posts: 641

Hi I have a Beko / flavel TD162 W dryer . The belt broke so I replaced it yesterday , however when i opened it the drum was actually seized so I thought the back bearing but no it was fine . The front of the drum that runs on plastic with a felt seal was actually where it was seized , I removed the drum and when I refitted it it turned fine so i put on the new belt but it has snapped again after only been used twice and the drum is seized at the front again. There appears to be 4 wedge like blocks at the top of the housing that the drum runs on ( Are these brakes ) or used to align the drum could one of these be causing the problem.

0