Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Storage heaters,a problem..

  • 06-01-2011 05:11PM
    #1
    SteeveeDee
    Registered Users, Registered Users 2 Posts: 103 ✭✭


    Hey guys,
    Any help with this would be greatly appreciated.Here it goes.

    None of the storage heaters in our place seem to be working.We just moved in and the place is freezing all day!Here is the low down.

    We have four Creda storage heaters about the flat but they are all the same with the same issue.

    Living room..This has an added fan heater that works instantly but no storage.It has 2 mains switches to the left of the wall.I have turned on the one for storage and set input to 5 and output to 2.Over the past few nights nothing has happened.we are on the nightsaver rate and have no devireg on the fusebox.When night storage is due to be on,there is quite a loud buzz from the fusebox where the devireg is supposed to be.
    Also in the living we have a "room temperature control" device on one of the walls with an on/off dial/switch and a heat dial.

    Also in the hall we have another one of these but is a "master temperature control" but has no on/off dial/switch

    I am confounded and can't seem to get it working.The letting agent came over and said it worked before and set it up the same way I would but still no luck.

    Anyone have any tips,I've checked the fuses and all are good.

    Thanks
    Steve


Comments

  • #2
    mazthespark
    Registered Users, Registered Users 2 Posts: 631 ✭✭✭mazthespark


    Set both thermostats up as high as they go and the switches to on. make sure you have the correct switch turned on beside the heater. if unsure turn on both and turn on the fan heater and find the switch which controls the fan heater other one will be storage. the buzzing noise in the fuseboard is probably the contactor for the storage heating. if there is no devireg and you have no luck with the above ideas could be a faulty contactor possibly. if unsure get a spark to take a look


Advertisement