WE PDW GBB for sale or trade

peter ting

WE PDW GBB bought in september of this year for 399 plus 2 extra magazines (total of 4 mags). Skirmished twice only. Not a mark or scratch. Sale for 300 ono. Would be interested in any electric gun of good quality that chronos 300+ fps except a sniper rifle.

Deadpool

Where are you based

hairyman

Any interest in a King Arms Galil MAR.
- Only 800(if even) rounds gone through it.
- 400rd hicap.
- Mechanical blowback.
- .95j,
- pretty much as new condition.
007.jpg

Edit - is this the the open bolt version.

peter ting

Deadpool wrote: »

Where are you based

I am based in Dublin 3/5 region.

peter ting

hairyman wrote: »

Any interest in a King Arms Galil MAR.
- Only 800(if even) rounds gone through it.
- 400rd hicap.
- Mechanical blowback.
- .95j,
- pretty much as new condition.
007.jpg

Edit - is this the the open bolt version.

Yes it is the open boldt version. Your King Arms looks like a variant of the AK? It has short barrel and is for CQB play? I am interested in distance as I only play outdoors. How much is your gun worth new? How many mags?

hairyman

peter ting wrote: »

Yes it is the open boldt version. Your King Arms looks like a variant of the AK? It has short barrel and is for CQB play? I am interested in distance as I only play outdoors. How much is your gun worth new? How many mags?

The replica set me back a little over 400 euro(just over a year ago), it only comes with one 400 rd hicap(strange because these were advertised as coming with 130 rnd mids) but mids are available off the shelf in hobby airsoft.

It has never seen a skirmish field,,,My folks have a good bit of private land(away from the eye of the public) and I can honestly say that it has good range for a CQB replica.
That being said, I have used some well sorted 455mm AK and 510mm M16 replica's, needles to say the Galil MAR is lacking(not as much as one would think),,,all in all, its a CQB replica, and a damn fine one at that .

makarov

hi
i have this if your interested .gun cost 170e.full metal :
comes with :
real army sling :30e.
1, hi cap mag :comes with gun .
4, 50 round mags :20e
1, acog red dot scope :70e.
1, silencer :45e
all together comes to a grand total of 300e .
also battery and charger cleaning rod .
i maybe interested in a trade .

to anyone that is interested in this trade . im only looking for a gas gun . thanks . GOT A GAS RIFLE THIS IS NOW UP FOR SALE .(250EURO)

peter ting

hairyman wrote: »

The replica set me back a little over 400 euro(just over a year ago), it only comes with one 400 rd hicap(strange because these were advertised as coming with 130 rnd mids) but mids are available off the shelf in hobby airsoft.

It has never seen a skirmish field,,,My folks have a good bit of private land(away from the eye of the public) and I can honestly say that it has good range for a CQB replica.
That being said, I have used some well sorted 455mm AK and 510mm M16 replica's, needles to say the Galil MAR is lacking(not as much as one would think),,,all in all, its a CQB replica, and a damn fine one at that .

Can you fit a long inner barrel into it with an outer barrel without making it an expensive upgrade? If I can I would be very interested in a swap.

peter ting

makarov wrote: »

hi
i have this if your interested .gun cost 170e.full metal :
comes with :
real army sling :30e.
1, hi cap mag :comes with gun .
4, 50 round mags :20e
1, acog red dot scope :70e.
1, silencer :45e
all together comes to a grand total of 300e .
also battery and charger cleaning rod .
i maybe interested in a trade .

Hi Makarov,
I have a CA MP5 already. Do you have a good long range assault rifle only for swap? A high end gun on its own is what I am looking for really. If I didn't have a MP5 already I would be interested in a trade.

hairyman

peter ting wrote: »

Can you fit a long inner barrel into it with an outer barrel without making it an expensive upgrade? If I can I would be very interested in a swap.

Of course.
Take into account that you will more than likely need to bore up(depending on the newer barrels length) and use a mock silencer to cover the new inner barrel.

I'm not sure if this would suite you.

makarov

sorry i dont . best of luck with trade .

Deadpool

I have a full metal CA M4.lipo ready.beast of a aeg.was up graded before a bought it.not sure what is done.I dont have a spare lipo battery.I can bring one for you to test gun
Also have full metal ICS M4 with gaurder barrell and hop up

peter ting

Deadpool wrote: »

I have a full metal CA M4.lipo ready.beast of a aeg.was up graded before a bought it.not sure what is done.I dont have a spare lipo battery.I can bring one for you to test gun
Also have full metal ICS M4 with gaurder barrell and hop up

Can you send me photos of both M4s' please. How old are they? Did you buy them new? The CA M4 use 7.4 or 11.1V lipo?
Yes, I would be interested in both guns. Was a Mosfet fitted into the CA M4 to take the lipo?
I think you live quite far from Dublin? I live in Dublin. Distance would be a problem?

peter ting

hairyman wrote: »

Of course.
Take into account that you will more than likely need to bore up(depending on the newer barrels length) and use a mock silencer to cover the new inner barrel.

I'm not sure if this would suite you.

I checked Redwolf and they had the Gail but a non-blowback version. Is that the same as yours? Must not because it only cost $249 US. I know things are cheaper from that part of the world anyway. Can you clarify. I am still thinking about your offer because I like the full metal aspect and it's a King Arms which is a good quality gun.

hairyman

It is the blowback model that I have.

Just like the one in the youtube link below.
http://www.youtube.com/watch?v=dSD7Vvhdj-o

The video says that it cannot take an 8.4v stick battery, untrue as I have had a 8.4v 1600MAH in with no trouble at all.

Stonewolf

Are there many upgrades on that PDW? Is it an RA-Tech or stock WE?

CO2 or Propane?

peter ting

Stonewolf wrote: »

Are there many upgrades on that PDW? Is it an RA-Tech or stock WE?

CO2 or Propane?

The gun is as it was when I bought it. It's a WE stock and fires with a nice kick back to make it more realistic. It can take either form of gas, but the mags are for gas and not CO2. Each mag cost 45 euro and holds 120 rounds.

hairyman

120 rnds?

Are you sure they are not 30-50 rounders.

Deadpool

peter ting wrote: »

Can you send me photos of both M4s' please. How old are they? Did you buy them new? The CA M4 use 7.4 or 11.1V lipo?
Yes, I would be interested in both guns. Was a Mosfet fitted into the CA M4 to take the lipo?
I think you live quite far from Dublin? I live in Dublin. Distance would be a problem?

not at home till tomorrow night then i will post photos.what part of dublin,dont mind to drive to dublin

peter ting

hairyman wrote: »

120 rnds?

Are you sure they are not 30-50 rounders.

Hi Hairyman, (I like your name by the way)

Yes you're right. Each mag holds 30-50 rounds. I was thinking of another gun I have. Thank you for the correction. It shows you I haven't used the gun for a long time !

peter ting

Deadpool wrote: »

not at home till tomorrow night then i will post photos.what part of dublin,dont mind to drive to dublin

I will wait for the photos and the answers to my previous questions.
Thanks

Deadpool

Ok.I got home and found out that i had left the ics m4 in a mate house.will have photos of it after 9 tonight.Uses 11.1 1600 lipo.I also have this m16 with magpul bits and g&g gearbox which i got new.the others i bought and traded for.I did not do anything since i got them.The first two are around a year old.the magpul is two weeks.I do not know if a mosfet was fitted,sorry.

peter ting

Deadpool wrote: »

Ok.I got home and found out that i had left the ics m4 in a mate house.will have photos of it after 9 tonight.Uses 11.1 1600 lipo.I also have this m16 with magpul bits and g&g gearbox which i got new.the others i bought and traded for.I did not do anything since i got them.The first two are around a year old.the magpul is two weeks.I do not know if a mosfet was fitted,sorry.

I think we can do business. I'll wait for the photos on the ICS. I have a lipo 11.1V battery already and hence, for my interest in the ICS M4.
When you said Magpul - do you mean the M16 with Magpul bits and G&G gearbox?

Deadpool

yes i got a got the gun two weeks ago.very nice gun.I am heading up to liffy vally tomorrow.PM me your number if you want to meet up and see them.

peter ting

Eh Deadpool,
I have to bring my kids to see Santa tomorrow night in Brown Thomas in city centre. Actually, I am suppose to meet a guy to purchase his G&G Raider in Liffey valley shopping centre tomorrow night at 10pm. I'm not sure if I can make that appointment in time. If I can I would be interested in seeing the M16. How much is it worth and what is included with that gun(Magpul)? Will you send photos of the ICS tonight?

Deadpool

I am meeting the same man i thinkgetting his gr300 if all goes well.(rooky)I cant put the photo up cause the lad never came home.said the roads were too bad.The magpul ..everything you see in the photo and a battery if you want one.I could not make it to liffy vally at 10 tomorrow night(he is meeting me in kinigad.it would be around 1 or 2 maybe earlier that i would be up there.

peter ting

Hi deadpool,
I will wait for the photos of the ICS. Patience is a virtue ! That way everyone is happy at the end. Talk to you soon. How much is the Magpul worth by the way? By any chance any of your guns bought or came from MIA?

Deadpool

At last.The ics was got from Hobby the combat machine m16 was got from carlow for 220 then the magpul gear,stock 100, front 40,grip from a friend in the states.The CA lipo m4,I am not sure where it was got new.Also i have no problum with bringing all 3 and letting you have a look.

peter ting

Hi Deadpool,
I like the ICS M4. How many mags do you have for it? Lipo battery comes with it? How much is it worth? I 'd be interested in a trade against your ICS. I can trust you that it is in perfect working condition and that there are no problems looming around the corner?? What do you think is a fair trade with no money exchanged ? I want you and I to be happy at the end of the day. I can vow that my PDW GBB has hardly been used, therefore in perfect working condition. I am going to meet Rooky tonight at 11PM in the car park of Liffey valley shopping centre.

Deadpool

The ics is not lipo.I can give you two hi cap mags and two mid cap.and a battery.It was just serviced by hobby.I can bring them all.see what you think.There should not be any problums but if there is i will try to sort you out.

peter ting

What is the value of your ICS at the moment? Love to see all 3 guns. Which one use Lipo? I am meeting Rooky tonight at 11 but the weather looks bad. No cancellation so far. We must arrange a meeting whenever it's the best time.

Deadpool

peter ting wrote: »

What is the value of your ICS at the moment? Love to see all 3 guns. Which one use Lipo? I am meeting Rooky tonight at 11 but the weather looks bad. No cancellation so far. We must arrange a meeting whenever it's the best time.

I dont know what to value it at,the full metal CA M4 is lipo.I am to meet rooky at 10.Do you know him well.I can get up to celbridge tomorrow if your around.

peter ting

Hi Deadpool,
Are you meeting Rooky in Liffey Valley shopping centre? I'm meeting him there. I can meet you there at 10:30? If you can pm me now

Deadpool

no i am meeting him in kiniegad.this side of enfield.i could go as far as enfield tonight if you could make it there

mrmojorisin24

Hi just wondering is this still up for trade if so would you be intrested in a Src Xm8
http://i1132.photobucket.com/albums/m562/mrmojorisin24/041.jpg

looneyirish

if you still have this in the new year i will buy it off yah, i love the pdw,
will kick ass in the block:eek:
best kick frim any we gbb, ive fired one off the other week, savage

peter ting

looneyirish wrote: »

if you still have this in the new year i will buy it off yah, i love the pdw,
will kick ass in the block:eek:
best kick frim any we gbb, ive fired one off the other week, savage

Hey Looneyirish,
I have sort of promised someone from an earlier thread to do a trade. It all depends on whether I like any of his guns he is offering for a trade. This will suit you better in case no trade takes place in the next week or two.
I will keep you posted as I prefer to get cash of course, but I do have a gentleman's agreement with him. Thanks for the offer

peter ting

mrmojorisin24 wrote: »

Hi just wondering is this still up for trade if so would you be intrested in a Src Xm8
http://i1132.photobucket.com/albums/m562/mrmojorisin24/041.jpg

Hey,
I have a G36 already which is very similar to the XM8. I know this gun from SGairsoft and I did like it, but I will have to pass on your offer. Thanks anyway.

mrmojorisin24

Sound mate hope all goes well and you get what your looking for.