Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

springs

  • 11-12-2010 12:14am
    #1
    munsterrugby
    Closed Accounts Posts: 12 ✭


    does anyone know the best spring i should put in my jg g36k to bring up the fps to around 320?
    thanks


Comments

  • #2
    MonkeyGuy
    Registered Users, Registered Users 2 Posts: 863 ✭✭✭MonkeyGuy


    Ok well this thread will probably be moved to questions or technical but I'll help anyway. Have you had the gun chronoed yet?


  • #3
    thermo
    Registered Users, Registered Users 2 Posts: 13,440 ✭✭✭✭thermo


    moved as this is not an advert


  • #4
    thermo
    Registered Users, Registered Users 2 Posts: 13,440 ✭✭✭✭thermo


    provided your air seals are good and the nozzle and cylinder are not drilled i would try a m90/95 spring,


  • #5
    madmaxi
    Registered Users, Registered Users 2 Posts: 701 ✭✭✭madmaxi


    Stay clear of the M95 springs, they're unreliable and are closer to M115. :mad:


  • #6
    munsterrugby
    Closed Accounts Posts: 12 ✭munsterrugby


    i got it chronod and it was around 180.


  • Advertisement
  • #7
    munsterrugby
    Closed Accounts Posts: 12 ✭munsterrugby


    would an m90 or work in a v3 gearbox? i remember trying a spring before and i could have sworn it was an m90 or m85 and it wouldnt fit! is there a big difference between the two?


  • #8
    Leftyflip
    Registered Users, Registered Users 2 Posts: 7,463 ✭✭✭Leftyflip


    Leave the spring alone for now, I'd say that you've some air seal issues, in one or more places, namely;
    - The piston, the O-ring may be dry and thus, not giving you any compression, try oiling it first (silicone oil), or you'll need to pack it out (ptfe tape)
    - The air nozzle, is it drilled? You'll want to replace it if so, bear in mind you'll also have to change the spring.
    - The cylinder, is that drilled? Once again you'll have to replace it and change the spring.
    - Is the hop rubber torn? You can lose masses of fps through there, yup, you'll have to replace it.
    -Is the cylinder head loose? You'll lose fps through there too, wrap some ptfe tape around it if it is.

    If I think of anything else I'll put it up, just in from HRTA, too tired to think...:D


Advertisement