TaylorMade R9 Supertri.Help Settings ?

macdonagh2007

I recently bought a new R9 Supertri driver which was set in the Neutral position. I am considered a straight driver ( down the middle) but not a long hitter I think because I have a slow swing speed ..around 83/85. I shifted the shaft over to the setting marked( R) thinking this would help me to draw the ball for more distance but I seem to be leaking my drives to the right...slice. Can someone help. Maybe this driver is in the wrong hands ?? My h/c came down from 16 to 12 since June.

MiniGolf

Neutral upright is what you want....http://www.taylormadegolf.eu/Assets/Picture/r9-supertri-tech1-21852.jpg
It won't hit the shot for you but it will be a little more forgiving!

("If in doubt.... get lessons!!")

jm99

I think if your a right hander and you set it too R,your drives will go too the right(fade)

macdonagh2007

Thanks for your help lads. If I set shaft setting to (L) will that help me in my efforts to get a wee draw on my ball flights or will I get hooks.

jm99

macdonagh2007 wrote: »

Thanks for your help lads. If I set shaft setting to (L) will that help me in my efforts to get a wee draw on my ball flights or will I get hooks.

It should I suppose. Only ever moved mine to NU and left it there.

jzumpella

You should check out this page for FCT and MWT instructions, the entire site is really helpful:

http://taylormader9driver.com/taylormade-r9-driver-instructions-so-what-does-the-fct-and-mwt-technology-actual-do-to-the-club