Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Solutions for PPK/S Maruzen thats FULL AUTO...

  • 27-08-2010 11:16pm
    #1
    Riko
    Closed Accounts Posts: 40 ✭


    hi guys!

    a quick overview of the symptoms and the solutions when your ppk/s goes full auto (maruzen or chinese clone of maruzen)

    Symptom 1: goes full auto, no matter the way you handle the trigger.
    Solution: look at your magazine, and especially at the spring in the first hole, this should sit HORIZONTALLY in the hole, not vertical!
    if you see this:
    magazine%20spring.JPG
    Than that is the cause of the full auto going on!
    You can see clearly the spring is vertical and almost poping out!

    On maruzen ppk's and also on maruzen mp5's the flute valve is not located within the guns loading nozzle, its the small brass cylinder and spring in the magazine.
    The nozzle has two sections, and the magazine regulates the gas output for both the shot of the bb and the blowback, if the spring becomes misplaced the flute vlave cannot do its job properly, causing the gas output to be directed to the blowback chamber only, hence the full auto problem.

    Solution: try to put the spring in HORZONTAL

    Solution for clone owners (and all others): get a Maruzen magazine! much better!

    Symptom 2: only full auto when you squeeze the trigger till the end, but not when you gently squeeze the trigger.
    I refer simply to 2 pictures, this is not good:
    spring.jpg

    and this is good:
    IMAG0242.jpg

    In all cases: there can be nothing wrong with your mag or your gun, but you simply have to lube the valve release on your magazine! :)
    (the button you can push to release the valve)
    Cause if the valve is not lubed properly, it can stick a bit and so it will not return when pushed, thus causing gas to eject for a long time, and causing a full auto...


Advertisement