G&P M16VN Kit /// WA M4 GBB CQBR Base /// AEG bits

Jelly 292

2 Kits/projects for those who like to build.

I need funds for latest build so sorry, NO trades.
Cash or bank lodgement preferable.
Willing to post but buyer pays for all costs.Can meet,Galway area.

G&P M16VN Kit
Full Metal. Very Rare conversion kit, Reciver is out of production afaik.
Correct early slab reciver and 3 Prong Flash.
The best VN AR-15 AEG available.
Rock solid construction.
Will not seperate the above.With pins and screws etc.
€230
http://www.2shared.com/file/xxQ6VZ_7/AR-15_Kit.html


G&P 7mm Bushing Gearbox Complete Set,
With new 0.9j Spring and new Deepfire Piston,maybe a 500 rounds through it(before i put the new spring and piston in)
I just cracked safety selector plate today in disassembly,doh, (€8 on airsoftireland) so -
€55 - SOLD

G&P M120 High Speed Motor,some wear on teeth from misalingment but under 1k rounds,runs perfect-
€25 - SOLD

http://www.2shared.com/file/ftICTryB/Gearbox.html

ALSO:

Hot Power 11.1 3300mah Li-Po, Only charged once,-
€25 - SOLD
http://www.2shared.com/file/6MK_scHK/Battery.html

2 x unused new JG M16 300rnd Hi- Caps -
€15 Each / 2 for €20 - 1xMagazine SOLD
http://www.2shared.com/file/f3aowPKv/JG_Mags.html


ARMS Flip up Sight - bit dinged on screw but works perfect.
€10

WA M4 Steel Carry Handle, good quality part,unused.
€15

http://www.2shared.com/file/3QubnErJ/ARMS_Sight.html

AND NEXT:

Western Arms M4 CQBR GBBR Complete Upper and Parts:

Spare after converting my original WA M4 CQB.
Parts much loved but in full working order.
Good for scratch build/ cheap base for 2nd gbbr.
Ive used this ABS body for 2+ years as its reliable and widely compatible.

-WA CQB RIS Front End with Vltor Flip Up Sight, gas tube, fore grip
-WA Upper and lower reciver,Pins
-WA Forward Assist.
-WA M4 Grip
-WA Buffer assembly and Buffer Lock
-WA Steel Stock Ring
-WA Magazine Release
-WA Recoil Buffer
-Airsoft Surgen 140% Recoil Spring
-WA 6.08 cqb inner barrel
-WA ABS Front Sight
-Anti Rotation Links
-EAC Magazine (WA Clone) slow leak on green,Can be fixed with the supplied G&P O rings,Im to lazy.
-G&P O rings and a bunch of ACM rings,2 ACM High Flow Magazine Valves

http://www.2shared.com/file/fkNi1stT/WA_M4_Kit.html

Will not seperate parts.
€130

deepimpact

Any chance of a photo of the G&P VN kit that doesn't need to be downloaded as a zip file?

scar 101

offer 5e for a mag

Jelly 292

offer 5e for a mag

Sorry, new JG's.

scar 101

k were are u based.

Jelly 292

Galway

Jelly 292

Any chance of a photo of the G&P VN kit that doesn't need to be downloaded as a zip file?

Sorry,big pics

http://img15.imageshack.us/i/picture001mx.jpg/

http://img401.imageshack.us/i/picture045gc.jpg/

Jelly 292

Shuld have put these up:

http://img42.imageshack.us/i/picture018or.jpg/

http://img155.imageshack.us/i/picture020vr.jpg/

Markom5a

Might be interested in the gearbox and motor I'll let you know tommorrow, by the way I'll be offering asking for both.

Jelly 292

Might be interested in the gearbox and motor I'll let you know tommorrow, by the way I'll be offering asking for both.

Sound.

Flanders536

hey can you tell me if the motor is short middle or long type please

Markom5a

Jelly 292 wrote: »

Sound.

Yea I'll take the gearbox will you post?

Jelly 292

hey can you tell me if the motor is short middle or long type please

Err,Long I think, as per pic's

Jelly 292

Yea I'll take the gearbox will you post?

Hay Markom5a,
Will send it tomorrow, PM me details.
Just to confirm you noticed safety selector plate needs rpl?
Cheers
Jelly

Markom5a

Jelly 292 wrote: »

Hay Markom5a,
Will send it tomorrow, PM me details.
Just to confirm you noticed safety selector plate needs rpl?
Cheers
Jelly

Yup saw that. Pm on the way

Jelly 292

Cool,Gearbox sold to Markom5a:)

Flanders536

Jelly 292 wrote: »

Err,Long I think, as per pic's

the pics in your original post need to be downloaded from a filesharing site which I am unable to do.

can you post a pic on imageshack or tinypic of the motor please.

Jelly 292

Motor Pics:

http://img830.imageshack.us/i/picture055i.jpg/

http://img836.imageshack.us/i/picture062g.jpg/

Flanders536

ok thanks mate, can i ask what sort of ROF did you get with that? thank you for the pics.

Jelly 292

Well, I ran a Li Po and Mosfet so silly ROF but I liked the trigger response.

Its down to the set up your running+battery really. Its fast, G&P seem proud of it.
On a li-po I got near instant trigger response

telebasher

offer asking on the 11v lipo

Jelly 292

Cool telebasher,
To the PM's!

SOCOM

Jelly 292 wrote: »

2 Kits/projects for those who like to build.

I need funds for latest build so sorry, NO trades.
Cash or bank lodgement preferable.
Willing to post but buyer pays for all costs.Can meet,Galway area.

G&P M16VN Kit
Full Metal. Very Rare conversion kit, Reciver is out of production afaik.
Correct early slab reciver and 3 Prong Flash.
The best VN AR-15 AEG available.
Rock solid construction.
Will not seperate the above.With pins and screws etc.
€270
http://www.2shared.com/file/xxQ6VZ_7/AR-15_Kit.html



G&P 7mm Bushing Gearbox Complete Set,
With new 0.9j Spring and new Deepfire Piston,maybe a 500 rounds through it(before i put the new spring and piston in)
I just cracked safety selector plate today in disassembly,doh, (€8 on airsoftireland) so -
€55 - SOLD PENDING COMPLETION

G&P M120 High Speed Motor,some wear on teeth from misalingment but under 1k rounds,runs perfect-
€25

http://www.2shared.com/file/ftICTryB/Gearbox.html
Will Bundle all the above for €300

ALSO:

Hot Power 11.1 3300mah Li-Po, Only charged once,-
€25
http://www.2shared.com/file/6MK_scHK/Battery.html

2 x unused new JG M16 300rnd Hi- Caps -
€15 Each / 2 for €20
http://www.2shared.com/file/f3aowPKv/JG_Mags.html


ARMS Flip up Sight - bit dinged on screw but works perfect.
€15

WA M4 Steel Carry Handle, good quality part,unused.
€20

http://www.2shared.com/file/3QubnErJ/ARMS_Sight.html

AND NEXT:

Western Arms M4 CQBR GBBR Complete Upper and Parts:

Spare after converting my original WA M4 CQB.
Parts much loved but in full working order.
Good for scratch build/ cheap base for 2nd gbbr.
Ive used this ABS body for 2+ years as its reliable and widely compatible.

-WA CQB RIS Front End with Vltor Flip Up Sight, gas tube, fore grip
-WA Upper and lower reciver,Pins
-WA Forward Assist.
-WA M4 Grip
-WA Buffer assembly and Buffer Lock
-WA Steel Stock Ring
-WA Magazine Release
-WA Recoil Buffer
-Airsoft Surgen 140% Recoil Spring
-WA 6.08 cqb inner barrel
-WA ABS Front Sight
-Anti Rotation Links
-EAC Magazine (WA Clone) slow leak on green,Can be fixed with the supplied G&P O rings,Im to lazy.
-G&P O rings and a bunch of ACM rings,2 ACM High Flow Magazine Valves

http://www.2shared.com/file/fkNi1stT/WA_M4_Kit.html

Will not seperate parts.
€170

i am interested in the gas M4 , is that a complete kit? Nothing else needed? Will offer 150 plus postage on top, providing I need nothing else to build complete gun

Jelly 292

Adding to WA M4 Deal:

-WA M4 QD Sling mount and 1 point Sling

-AABB Tight Inner barrel Chrome, does not fit my RA-TECH Hop up unit, I gave up sanding it! Dremel it down and your in buisness.

http://img829.imageshack.us/i/picture119.jpg/

http://img208.imageshack.us/i/picture120w.jpg/

Jelly 292

Hi SOCOM,

This is not the complete gun. Its the parts left over from my original WA M4 after Ive just about changed every other bit! All of these parts just gathering dust. Good GBBR project base.

To complete a build you need:

-Hop up unit and Rubber
-Hop Up Housing
-Trigger Set
-Bolt stop assembly
-Bolt,Nozzle
-Charging handle
-Dust Cover
-Stock of you choice


Check here for parts:

http://www.ebairsoft.com/airsoft-parts-parts-c-68_94.html

Everything is there that youd need for cheap with no full gun import hassle.
This is why Im building/converting rather than try get a full GBB Rifle from Asia.

SOCOM

Jelly 292 wrote: »

Hi SOCOM,

This is not the complete gun. Its the parts left over from my original WA M4 after Ive just about changed every other bit! All of these parts just gathering dust. Good GBBR project base.

To complete a build you need:

-Hop up unit and Rubber
-Hop Up Housing
-Trigger Set
-Bolt stop assembly
-Bolt,Nozzle
-Charging handle
-Dust Cover
-Stock of you choice


Check here for parts:

http://www.ebairsoft.com/airsoft-parts-parts-c-68_94.html

Everything is there that youd need for cheap with no full gun import hassle.
This is why Im building/converting rather than try get a full GBB Rifle from Asia.

Mmm, don't know just checked roughly and it looks like the guts of 150 to rebuild with standard parts add in shipping from china and yourself and I'm not far off the price of a new one, what's your rock bottom?

Jelly 292

Its free shipping on ebairsoft.

Not into stating my rock bottom €€€ publicly yet, I do have one and it is a reasonable one. Give it a few days as theres no rush.

A fair deal for all can be had but it depends on what your after.

This is the base for a project/scratch build, not a gun that need repairing as such, if you get me.
So many variable on this platform some folks just want another shell to fiddle with etc or a CQB upper to slap on thier M4

Jelly 292

If you had no parts this is what you'd need to get shooting:

AABB Powder Metallurgy Steel Hammer Set For WA M4 9.91EUR
AABB Powder Metallurgy Steel Selector For WA GBB M4 9.67EUR
AABB Powder Metallurgy Steel Bolt Stop For WA GBB M4 9.67EUR
AABB made WA CNC GBB M4 Bolt Stop Base 11.68EUR
AABB WA GBB Metal Receiver Dust Cover ( 4 model ) 7.97EUR
AABB Steel Trigger Set For WA M4 10.47EUR
AABB Powder Metallurgy Steel Sear For WA GBBR 6.12EUR
AABB WA Steel Hummer Lock Set 6.44EUR
AABB WA Reinforced Spring & Pin Set 6.85EUR
AABB WA GBB Chromic Coating Complete Bolt Carrier 15.71EUR
AABB WA GBB Metal Charging Handle 12.08EUR
Vltor Buffer Tube For WA M4 (One Piece) EX119 10.95EUR
CNC Aluminum Hop Up Chamber for WA GBB M4 11.28EUR

TOTAL SHIPPED: 128.79EUR

I cant find any WA/ACM gbb stuff on sale in Ireland (sure there is ,lol)
But the WE's start at €400.

gambitthefirst

offer 30 for a mag and motor posted.

Jelly 292

offer 30 for a mag and motor posted.

Deal gambitthefirst, PM me your details:)

gambitthefirst

Jelly 292 wrote: »

Deal gambitthefirst, PM me your details:)

pm in bound

Jelly 292

Price Drops:

G&P M16VN Kit: €230

Western Arms M4 CQBR GBBR Complete Upper and Parts: €130

JG M16 300rnd Hi- Cap: €7

ARMS Flip up Sight: €10

WA M4 Steel Carry Handle: €15

Jelly 292

Update-M16vn kit -

€200


WA M4- Widthdrawn