[For Trade]Taurus PT99 Co2

Flanders536

Hi All, I'm looking to trade this PT99 for any other air-softing equipment.

Some back round info:
I bought the gun here on boards just over a month ago, http://www.boards.ie/vbulletin/showthread.php?t=2055927592

The gun only fires on fully auto, the safety catch does not work fully as I had to fit a right handed trigger pull onto an ambidextrous pistol so the safety does not sit in fully. This can be easily fixed with a replacement piece. The gun works perfect just only on fully auto lol

It comes with two 44 round Co2 mags.
Pics:

airsoftdes

hey man what sort of gear ya looking for

Flanders536

hey mate honestly looking for anything at all, AEG's, Gear, I'm willing to add cash if needed

I have a Novak Next 1911 which I love so this baby is not going to be used so looking for a caring home

philly50

wud u sell this

Flanders536

Not really looking to sell this at the moment, sorry.

Flanders536

Humpty Bumpty

TerrorFirmer

Sorry if this is being a total noob but what's a right handed trigger pull got versus a 'standard' trigger pull? I didn't realise there were specific trigger types. Also, what part is missing exactly and what happened the original parts? I'm really interested but a bit confused. Thanks.

Flanders536

TerrorFirmer wrote: »

Sorry if this is being a total noob but what's a right handed trigger pull got versus a 'standard' trigger pull? I didn't realise there were specific trigger types. Also, what part is missing exactly and what happened the original parts? I'm really interested but a bit confused. Thanks.

I will post a detailed response to your question in a few minutes need to get the camera to show you what I mean

Flanders536

Ok so here we see the Original piece, it is broken down the end, you can see my half ass attempt at a temporary fix with steel adhesive.



Here is a pic Of the piece I ordered in from Hong Kong, As you can see it has been filed down as it was made for a Right handed PT99(meaning one that does not have a safety on both sides of the pistol)


The next Pic is of the new piece sitting in place in the pistol, If you look to the left of the picture you will see a hole and just below it is the part of the new piece I filed down. So if this was a right handed pistol there would be no hole there and the peice i filed off would just sit up there, but as you can see in the next pic it gets in the way.


The next Pic is of me putting the safety switch into this side, Basically the safety switch's from each side meet in the internal of the pistol, so changing the safety on the left side will auto move the safety on the right.

The last picture is the problem, you can see in the middle of the photo the safety switch will not sit flush with the pistol due to the trigger pull partly blocking it.
As I said this can be fixed by just buying in or getting a repalcement. just I have not put in an order from Ehobbyaisa in a while so never got the correct piece for it.


Hope this help explain what I mean mate, if you want further details please let me know

Flanders536

TerrorFirmer

Looks good. How much? Pretty sure I'll take that

Any chance you have a picture of that 2nd last picture with the springs in? I took the two out there and now I can't remember how they went back in argh!

Flanders536

TerrorFirmer wrote: »

Looks good. How much? Pretty sure I'll take that

Any chance you have a picture of that 2nd last picture with the springs in? I took the two out there and now I can't remember how they went back in argh!

I would loe to accomadate you but I cant find them now. I can tell you for your own the long one with out a loop in it goes on the bottom catch and the one with the loop in it gos in teh top catch. Still looking for them lmao.

Typical this aint it.

TerrorFirmer

Never mind - got it finally.

So, yes - let's talk business, assuming you find said springs

Flanders536

TerrorFirmer wrote: »

Never mind - got it finally.

So, yes - let's talk business, assuming you find said springs

All honesty I dunno how much it is worth now lol, I only ever intended to trade this for something small ya know

TerrorFirmer

Well if you want to throw up an asking price I'm interested in making a cash offer, would like to have two of them but unfortunately I really don't have anything to offer trade wise.

Flanders536

hey mate, might be a no go as I still cannot find those 2 pieces of metal.

Note to self, Never disassemble an AEG with small parts on you work table that is full of crap and other small parts

I will look again this evening when I get home from work.

TerrorFirmer

I'll still take it off your hands if the price is right

Be good for spare parts anyway!

Flanders536

Ill have another look when I get home for them mate. how does 65 posted sound?

TerrorFirmer

Do both magazines work okay?

Flanders536

TerrorFirmer wrote: »

Do both magazines work okay?

Both work fine, I have skirmished with it twice and used it twice, the only issue from my experience is the safety switch.

If you want I can send down the allen key for the mags

TerrorFirmer

any joy on the springs?

Flanders536

saddly no not yet

TerrorFirmer

Hmmm. Even without the springs. I'll offer 55 posted. Need the mags anyway and I do want a spare slide because I've a feeling I'll end up ruining mine in my current project

Flanders536

TerrorFirmer wrote: »

Hmmm. Even without the springs. I'll offer 55 posted. Need the mags anyway and I do want a spare slide because I've a feeling I'll end up ruining mine in my current project

Meet in the middle and say 60 including postage?

TerrorFirmer

Deal then

Flanders536

TerrorFirmer wrote: »

Deal then

To Pm's good sir

SOCOM

Flanders536 wrote: »

To Pm's good sir

do you still have that for sale? Where are you based?

Flanders536

SOCOM wrote: »

do you still have that for sale? Where are you based?

I am still waiting on terror got a pm a few days back saying he was working 60 hour week ill pm him now and give him till monday

Im based in waterford

SOCOM

Flanders536 wrote: »

I am still waiting on terror got a pm a few days back saying he was working 60 hour week ill pm him now and give him till monday

Im based in waterford

sorry mate bought a Mac 11 from airsofteire two days ago so I am skint and will have to withdraw, best of luck with the sale

TerrorFirmer

Haven't forgotten, that week just ended as of now

Flanders536

TerrorFirmer wrote: »

Haven't forgotten, that week just ended as of now

np at all mate as I said you were working a 60 hour week lol