Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

JCB 3C MARK II refit the back actor, help needed

Options
  • 05-06-2010 2:52am
    #1
    xileer
    Closed Accounts Posts: 15 ✭


    I have a JCB 3C MARK II model digger, which I need to refit the back actor, has anybody any ideas what the best way to go about it?


Comments

  • Options
    #2
    dunsandin
    Closed Accounts Posts: 879 ✭✭✭dunsandin


    No idea of the real way to do it, but I used to prop our backactor up on a block of timber, about 5" higher than its pin holes should be, using the front bucket. Then I used to reverse up to it and once lined up, I used the jacks and the slew to get the holes lined up, fired in the bottom pin and connected the pipes, extended the ram and lined it up with a stout lump of timber, fired in that pin, and always swore never to take the bloo#y thing off ever again.


Advertisement