Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Manfrotto 141RC head/Plate

  • 27-05-2010 9:40am
    #1
    dave66
    Closed Accounts Posts: 708 ✭✭✭


    Hi,

    I have a Manfrotto 141RC head and recently have noticed that with the camera (Sony Alpha 550) fitted even with a short/light lens there is a noticeable amount of movement when the quick release plate is on the head.

    Can't work out if it's the plate or the receiver, but it's getting a little frustrating when I have the shot lined up if I have made an adjustment (aperture/speed/iso) that when I remove my hand the camera can shift.

    Had anyone had such a problem with the 141RC head/plate? The tripod and head is probably about 12 years old now but in good condition.

    This is the 141RC head that I'm talking about:

    446619145dFzHhT_ph.jpg


Comments

  • #2
    Borderfox
    Registered Users, Registered Users 2 Posts: 10,263 ✭✭✭✭Borderfox


    turn the quick release plate around opposite to the way you put it in. I have one and in one direction it gas some rocking but in the other direction nothing


  • #3
    dave66
    Closed Accounts Posts: 708 ✭✭✭dave66


    Borderfox wrote: »
    turn the quick release plate around opposite to the way you put it in. I have one and in one direction it gas some rocking but in the other direction nothing

    Hmm, never thought of that, will try that tonight, cheers!


  • #4
    dave66
    Closed Accounts Posts: 708 ✭✭✭dave66


    I had a bit of time last night to look at the head, the problem had nothing to do with the plate orientation, it was down to the locking mechanism. At the rear of the head where the lever to release the plate there is an allen screw holding the locking mechanism - this is spring loaded. The problem was really simple to resolve, the darn allen screw had loosened to the point where the spring could not compensate for the looseness, simply tightened the allen screen to put more tension on spring and everything is rocked solid again.


  • #5
    teramai
    Registered Users, Registered Users 2 Posts: 3 ✭teramai


    not bad Dave after 12 years , hope mine stays as good --its a 494rca manfrotto ballhead just got it to-day.:


Advertisement