Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie

Drop in pressure in hot tap.

Options
  • 14-05-2010 7:18pm
    #1
    Registered Users Posts: 295 ✭✭


    There seems to be a drop in pressure in my hot tap. Had a look at storage tank seems fine full never had a problem. Could there be something in the pipe between cylinder and tap is this possible.:confused:


Comments

  • Registered Users Posts: 73 ✭✭laois hibby


    possibly an air lock.


  • Registered Users Posts: 295 ✭✭Anthonyk2010


    Any solutions or an air lock.


  • Registered Users Posts: 73 ✭✭laois hibby


    if you have a mixer tap hold your hand over the end of the spout and turn on the hot tap. then turn on the cold tap and force water back up the hot tap. release it switch off cold tap and let the hot run. it should get rid of the air.
    if you don't have a mixer place a short section of hose between hot and cold taps and slowly turn on the water to both.turn off cold and as above let the hot run.


Advertisement