Upgrade's for a M16A4

seanoff

Just wondering what upgrade's I could put into my new M16A4.

Washington Irving

Brand?

P.K

seanoff wrote: »

Just wondering what upgrade's I could put into my new M16A4.

depends on what you want from it
better rate of fire?
more range?

its a bit of a broad question to ask seeing as how theres so much that can be done/replaced in an aeg

seanoff

Well it's a A&K and I basically want a better rate of fire and more range

Damo 2k9

Tightbore barrell, guarder clear hop rubber, high speed motor, have it re-shimmed etc etc
Im sure that the lads who know more than me will have other ideas for upgrades

Washington Irving

ROF: Higher volt battery and maybe a higher torque motor (I recommend a G&P M120).
Range: A new hop (Guarder would probably be your best bet) and a Tightbore Barrel. The barrel may increase the FPS about 5-10, so just be wary if the FPS is already close to the limit

Damo 2k9

SAULGOODE9 wrote: »

ROF: Higher volt battery and maybe a higher torque motor (I recommend a G&P M120).

Couldnt remember the name of the motor everyone recomends but now i do :P

P.K

Well then
Range:
Guarder silicone hop up 50° Hardness, would be the cheapest way to the best range.
Tanoi Koba twist barrel, gives good results but for an M16 lenght one your looking at 60-80 euro.

Rate of Fire:
9.6volt battery,
high speed motor such as G&P m120 or TM EG1000

If you havent a ball of money to spend id stick with a new motor and Silicone hop up.


Edit:
and ive been beaten to it by numerous others,
as you can see Silicone hop is the best bet for range,
as for tight bore barrels, personally id rate the TK ones over any TB barrel but thats down to a matter of opinion.

and the two motors ive listed, they both give the same results i find the TM one being more reliable

seanoff

Alright thanks lads