Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

BROKEN UMP

  • 27-03-2010 1:51pm
    #1
    .SONIC.
    Closed Accounts Posts: 777 ✭✭✭


    i dont know wether this should be here or in technical but ill put it here anyway :L

    so my ump was broken, the wiring to the trigger mechanism was broken but my dad took it apart and after lots of work i finaly got it to work:)

    but 2 problems,
    1). i know have two full autos instead of a semi and a full, does this mean i cant go airsofting again, due to not being able to chrono??

    2). if i bring it to the shop and want to get it fixed wil it cost extra??

    thanks,
    SONIC

    (if the thread is in the wrong place can a mod please move it, cheers)


Comments

  • #2
    thermo
    Registered Users, Registered Users 2 Posts: 13,440 ✭✭✭✭thermo


    sound like the selector mech is a bit "off",
    if you bring it to a techie it will cost you a small fee im sure, as even if it was still covered by warrenty when the wire broke, by opening it yourself to do the repair,the warrenty was void'd (did i just make up a new word there?)


  • #3
    ED E
    Registered Users, Registered Users 2 Posts: 36,170 ✭✭✭✭ED E


    You(He) assembled the selector incorrectly/connected the wiring in such a way that the semi slider is bypassed.

    First thing to try is reassemble the selector:
    The lines on all the cogs should line up, its an easy thing to miss.
    The lever in the gearbox needs to be in the "track" of the cog.
    The lever must be sprung so that in interacts with the shuttle that controls semi.

    If this doesnt work, he's wired it wrong. Did he open the gearbox itself at all?


  • #4
    .SONIC.
    Closed Accounts Posts: 777 ✭✭✭.SONIC.


    thermo wrote: »
    sound like the selector mech is a bit "off",
    if you bring it to a techie it will cost you a small fee im sure, as even if it was still covered by warrenty when the wire broke, by opening it yourself to do the repair,the warrenty was void'd (did i just make up a new word there?)


    ahh thanks:) well i kind of guessewd the warranty would be void, but will it cost extra because ive opened it up???

    p.s i kinda like the word void'd :):)


  • #5
    .SONIC.
    Closed Accounts Posts: 777 ✭✭✭.SONIC.


    Lethal_Bullet wrote: »
    You(He) assembled the selector incorrectly/connected the wiring in such a way that the semi slider is bypassed.

    First thing to try is reassemble the selector:
    The lines on all the cogs should line up, its an easy thing to miss.
    The lever in the gearbox needs to be in the "track" of the cog.
    The lever must be sprung so that in interacts with the shuttle that controls semi.

    If this doesnt work, he's wired it wrong. Did he open the gearbox itself at all?


    oh okay, ill show him this l8r and see if he can do anything, im not sure if he opened the gearbox but i dont think so . . .

    THANKS FOR THE REPLYS :D


Advertisement