Wanted M4/16 bodies

DeBurca

Looking for M4/16 AEG bodies reasonably priced
Most have both upper and lower sections and be fully complete (charging handle, dust cover, both body pins, mag release etc)
Metal bodies preferred but may consider ABS ones

birdman 1979

I have a G&P M4 metal body, i has all the trimmings. It is the Zombie hunter one. Got it for a project but i never put it on. Its still in the box. I will be at LAC on sunday, if you want to have look at it.

http://www.fire-support.co.uk/product/gp-zombie-killer-metal-body

DeBurca

birdman 1979 wrote: »

I have a G&P M4 metal body, i has all the trimmings. It is the Zombie hunter one. Got it for a project but i never put it on. Its still in the box. I will be at LAC on sunday, if you want to have look at it.

http://www.fire-support.co.uk/product/gp-zombie-killer-metal-body

Would love to have it but I feel that it may be a bit dearer then I had in mind
Just what sort of money have you in mind for it

birdman 1979

DeBurca wrote: »

Would love to have it but I feel that it may be a bit dearer then I had in mind
Just what sort of money have you in mind for it

Well that is a good question. Have you anything to use as a part trade?

DeBurca

birdman 1979 wrote: »

Well that is a good question. Have you anything to use as a part trade?

I have a few bits and pieces that may interest you

6-24 x 50 Tasco Scope with Mil-Dot recticle + mounts/rings

4 x 32 M series carry handle scope with crosshair illumination (only 4 of the 7 illumination levels work)

Walter P99 AEP with Electric Blow Back, fires Semi/Auto with batteries and charger, perfect for a bit of plinking about the house. Great fun indoors, but it’s not a serious piece to skirmish outdoors with, may be OK for CQB

Firefox 7.4v & 11.1v Lipo battery charger with balancer module

New M4 hand guard will fit G&G

A 20mm Ris/Ras mountable bipod adjusts to 6 different heights Very sturdy

A bipod for M series rifles like the M4/M16 with the standard hand guard, adjusts to 6 different heights


Metal propane adapter for filling GBB pistols + Full unopened propane tank & ¼ full tank


I can provide photos of any thing that you may fancy

rampantglory

hey deburca
where did ya pick up ur carry handle scope??

DeBurca

rampantglory wrote: »

hey deburca
where did ya pick up ur carry handle scope??

It was got from those nice people at Eirsoft

thebillynator

how much would you sell that carry handle scope for

birdman 1979

DeBurca wrote: »

I have a few bits and pieces that may interest you

6-24 x 50 Tasco Scope with Mil-Dot recticle + mounts/rings

4 x 32 M series carry handle scope with crosshair illumination (only 4 of the 7 illumination levels work)

Walter P99 AEP with Electric Blow Back, fires Semi/Auto with batteries and charger, perfect for a bit of plinking about the house. Great fun indoors, but it’s not a serious piece to skirmish outdoors with, may be OK for CQB

Firefox 7.4v & 11.1v Lipo battery charger with balancer module

New M4 hand guard will fit G&G

A 20mm Ris/Ras mountable bipod adjusts to 6 different heights Very sturdy

A bipod for M series rifles like the M4/M16 with the standard hand guard, adjusts to 6 different heights


Metal propane adapter for filling GBB pistols + Full unopened propane tank & ¼ full tank


I can provide photos of any thing that you may fancy

Say the lipo charger, and the propane adapter, plus 30?

DeBurca

thebillynator wrote: »

how much would you sell that carry handle scope for

Hi Bill will wait until Birdman answers and if he is not interested in any thing then I will start a for sale thread

DeBurca

birdman 1979 wrote: »

Say the lipo charger, and the propane adapter, plus 30?

You my friend have a deal and we can meet in LAC on sunday
So to PM to sort out the details

birdman 1979

DeBurca wrote: »

You my friend have a deal and we can meet in LAC on sunday
So to PM to sort out the details

No problem. Nice to sort out a fellow Banner Man.

DeBurca

M4/16 bodies still wanted
I am looking for 2 bodies in total
Metal preferred will also take ABS

Inari

Don't know if it's any good to you, but I'll be swaping out the ABS body on my M4 for a metal one in the very near future (Awaiting a hop up mech)...I need the parts from the ABS one to put in the metal one, but if you're interested, offer's available

DeBurca

Inari wrote: »

Don't know if it's any good to you, but I'll be swaping out the ABS body on my M4 for a metal one in the very near future (Awaiting a hop up mech)...I need the parts from the ABS one to put in the metal one, but if you're interested, offer's available

Hi Inari what parts will you be taking from the ABS body for use in the metal one

Inari

It'd be the bare bones ABS body. I'd need to use trigger guard, dust cover, charging handle etc.

I didn't think you'd be interested in it since it comes with sweet FA, but just said I'd let you know in case you wanted it.

DeBurca

Inari wrote: »

It'd be the bare bones ABS body. I'd need to use trigger guard, dust cover, charging handle etc.

I didn't think you'd be interested in it since it comes with sweet FA, but just said I'd let you know in case you wanted it.

What did you have in mind for this BARE BONES body

Inari

Well, you see I don't need it anymore once I get around to putting the metal one on. I need a hop up mech to do that, as the two-piece one won't fit inside. If you had a hop up mech like this:
http://shop.ehobbyasia.com/upgrade-part/parts-upgrade-aeg/hop-up-enhancements/gandp-m16-metal-hop-up-unit-for-marui-m4-m16a2-series.html
then I'd offer a straight trade. I'll actually be heading down to Clare soon for Easter break, so could meet up and exchange then, so advantage of no postage costs.

DeBurca

Inari wrote: »

Well, you see I don't need it anymore once I get around to putting the metal one on. I need a hop up mech to do that, as the two-piece one won't fit inside. If you had a hop up mech like this:
http://shop.ehobbyasia.com/upgrade-part/parts-upgrade-aeg/hop-up-enhancements/gandp-m16-metal-hop-up-unit-for-marui-m4-m16a2-series.html
then I'd offer a straight trade. I'll actually be heading down to Clare soon for Easter break, so could meet up and exchange then, so advantage of no postage costs.

Like you I also have the 2 piece hop-up type(JG 416)
All I have is an AK hop-up still in its bag has not been put together or I can offer you a shiney new element lightweight Piston
I should also have somewhere around a new guarder silicone hop-up bucking
Any of the above of interest to you

Inari

Unfortunately not. It'll be a while before I get around to swapping out the bodies (I'm a master procrastinator), but if you're still interested in it when it's sorted, it's yours for cost of postage.

DeBurca

Inari wrote: »

Unfortunately not. It'll be a while before I get around to swapping out the bodies (I'm a master procrastinator), but if you're still interested in it when it's sorted, it's yours for cost of postage.

That would be great , many thanks
Maybe someday I can do you a favour also

DeBurca

Still looking for at least 1 or maybe 2 (if the price is right) M4, M16 or 416 bodies
Metal bodies preferred but ABS considered