question about flashing 360- philips 83850c drive

j4vier

hi
a friend of mine asked me to flash his xbox which has this drive but i ve been having some problems

i previously flashed a ms25 and a benq , but never had problems similar to these

using jungleflasher 0.1.70 , have portio installed
jf detectes my drive , but i have 0 com ports present and i cant get the fw from the drive with the half closed drive method, i think this is where the problem lies

have win 7, a pci via card 6421 and a intel Intel Desktop Board DX58SO

tried using google but im more confused then before

thx for the help

TouchingVirus

You have a Philips/LiteOn 83850C v2, this won't dump like a regular drive ..you have to seek other methods like a pin lift. Either way some work needs to be done on the circuit board of the drive, this isn't a simple BenQ/Samsung flash

Myrddin

Also, although JF runs under x64 Win7...it simply doesnt work effectively. So make sure your using an x86 OS.

j4vier

hi
ye i am using windows 7 x86
i tought i had a v2 too, however when i gooled about it, i didnt get a confirmation of that.
people with a v2 were getting error messages from jf saying that it didnt support a v2 , i didnt get anything like that.
also my drive says may 2009 which would make me think is more a v1 than a v2

TouchingVirus

If it's a v1 then why can't you dump the firmware using the half-open method? What is your error? I've a v1 83850C and I've flashed iX LT to it only last weekend.

j4vier

i get an error sayin no com ports found at the start

then when i try the procedure ,it gives me an error like in the pic

i tried using lo83 and freekey from dos too. but no luck with that either

have u seen something like this?

TouchingVirus

You are following the Jungleflasher guide (found at Jungleflasher's site) yes?

Can you post your full JF log too?

j4vier

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.70 Beta
Session Started Sat Feb 13 13:14:26 2010

This is a 32 bit process running on 8 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 14 I/O Ports.
Found 0 Com Ports.
Found 11 windows drives C: E: F: H: I: J: K: L: M: O:
Found 2 CD/DVD drives F: M:

0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S
0020: 38 35 30 35 30 43 2D 32 - 00 00 00 00 00 00 00 00 85050C-2........
0030: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

Sending LO83info request to I/O port 0x1140

............
................
0000: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0020: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0030: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


LO83info extraction Failed!


No Drive Detected! DVDkey files extraction aborted!

Sending LO83info request to I/O port 0x1140

............
................
0000: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0020: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0030: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


LO83info extraction Failed!

0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S
0020: 38 35 30 35 30 43 2D 32 - 00 00 00 00 00 00 00 00 85050C-2........
0030: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

Sending LO83info request to I/O port 0x1140

............
................
0000: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0020: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0030: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................


LO83info extraction Failed!


ye im using the jungleflasher guide , according to that
l083 would tell me at the start if it is a v2, so it has to be a v1

j4vier

good news for that part
i was able to get the dummy file

one question about the erease step .

as shwn in the pic, the guide says u shuold get good flash chip properties
and im not gettin them..
what happens if i continue

drive is in vendor mode

Power cycle the drive

Hit intro.

j4vier

thx

had to do itr 5 times to get it right

works grand, thanks again for the help