Aritech CS250 how d'ya change dialout no.?

ArraMusha

How do you Aritech change dialout number on an Aritech CS250?

The manual p.65 says navigate to communication then cen station 1 ,
then enter the phone number...
then you have to select ARC A/C Num, then ARC protocol.

I have a 'super user code' and maintenance code.

thanks

KoolKid

Change the phone number central station 1 , 2 etc
ARC Protocol defines how the panel communicates with the Monitoring Station ARC account number identifies you.

vwcaddy

change central station numbers. if its voice dialer and not monitoring ensure the protocall is set to voice and that you use an account number aswell a mock account number is sufficent. aritech are not too user friendly. unless you have a voice dialer fitted dont enter a number into central station acc because if your system goes into alarm it will ring the numbers until they are deleted from the system. and if you are using a monitoring station certainly do not change the numbers or add any extra numbers as it will effect the response of the alarm.

altor

If installing this yourself dont forget to program the handshake and kiss off also.

bryanbal

hey guys
what settings need to be changed to ring in and turn off alarm. or turn it off when it calls you?
cheers

altor

bryanbal wrote: »

hey guys
what settings need to be changed to ring in and turn off alarm. or turn it off when it calls you?
cheers

What system are you using ?

bryanbal

sorry aritech cs250.
thats if you can do it.

altor

If your using the voice dialer on the CS250 there is no option to do this.

bryanbal

what system can you ring in to turn off.
Also on the cs350 what dialler can i use?
thanks

altor

bryanbal wrote: »

Also on the cs350 what dialler can i use?
thanks

The Gardtec Speech Dialler may be used for communicating speech messages for this alarm system. The unit may be programmed with up to four telephone numbers.

bryanbal

thanks