Need Help !!!! URGENT

kanewazere

just wondering is a 1.3 efi corolla engine the same as a starlet 1.3 efi engine .. (1991-1995).. ?

Bonito

kanewazere wrote: »

just wondering is a 1.3 efi corolla engine the same as a starlet 1.3 efi engine .. (1991-1995).. ?

this should clear everything up for ya

http://en.wikipedia.org/wiki/Toyota_E_engine

kanewazere

thanx

kanewazere

i am going to sound very stupid but i still need a second opinian....lol:P:P

Mick K

Yup,Same

kanewazere

are u 100% sure because dont wanna blow my money ? ..

Bonito

kanewazere wrote: »

i am going to sound very stupid but i still need a second opinian....lol:P:P

Like many of Toyota's other engine designs, the E engine series features a cast iron block, along with an aluminum cylinder head. The members of the E engine family, range from 1.0 L to 1.5 L. The E family supplanted the K engines in most applications. A large number of parts in the E engine series are interchangeable between each other especially all the 4E and 5E engines which all share the same block.



The 3E is a 1.5 L (1456 cc) SOHC version. Output ranged from 78 hp (58 kW) to 87 hp (65 kW) at 6000 rpm with 87 ft·lbf (118 N·m) of torque at 4000 rpm to 89 ft·lbf (121 N·m) of torque at 4800 rpm. It appeared in 1986, and was discontinued after 1994. The 3E engines appeared in both carbureted and fuel-injected applications. The 3E-TE, appearing in 1986, was a turbocharged engine producing 113 hp (84 kW) at 5600 rpm with 127 ft·lbf (172 N·m) of torque at 3200 rpm.

Applications:

* Toyota Tercel
* Toyota Corolla II
* Toyota Starlet(EP71)

The '3E' and '3E-E' engines are considered slightly less reliable than other Toyota engines, although they are also among the easiest engines to service. The most common problems affecting these engines are premature valve stem seal (nitrile) failure, carbon buildup on the intake valves, and collapse of the oil control ring on the piston. Any of these conditions can lead to rough idling, stalling, and fouled spark plugs, and therefore need to be differentially diagnosed. The valve stem seals, at least, can be replaced with silicone or viton-based seals which last much longer.[1]


How's that for ya?

kildarelad

The Corolla And starlet engines are definitelt the same cos we have done a swap fom one into a starlet.If you want to put a bigger engine in put in a Toyota Cynos 1.5 lire engine its A direct fit

kanewazere

thanx kildarelad , do you know if the 1996-99 style starlet has the same engine as the 1991-1995

Thornography

Yeh, the same.

kanewazere

does the 1991-95 not have a 12v and the newer one has a 16v?
i dont really know thats why i am asking