Glock 26C problem

.22 Lover · 16-11-2009 8:05pm #1

Hi i have a KSC glock 26C witch jams on full auto and is fine on simi here are some pics of the stuck cylinder when the slide is open and closed or trying the only way to get the gun working is to push with a small amount of force the cylinder back into the slide.

Dread-Lock · 16-11-2009 11:19pm

What gas are you using? Green gas or hfc 134a? If your using hfc 134a it might be to weak to operate the gun properly.

When you take the slide off can you move the air nozzle freely by hand or does it still get stuck?
Might it just need some silicone oil to get it going?

Also another thing to check is the spring that pushes the air nozzle back. Does it look damaged in anyway?

I've got one myself and I love the little thing. Just can't seem to get mags for it

. By any chance do you know of anywhere?

.22 Lover · 16-11-2009 11:26pm

Im using ASG green gas and the only place i know that sell G26 mags are ehobby and Redwolf.By the way one of the springs is slighty bent a quarter down the end i tried to strighen it out but i dont think it worked well and my gun is so full of silcone the first shot is a fog machine

Dread-Lock · 16-11-2009 11:45pm

I can't say for a 100% certainty that the bent spring is causing the problem. But thats the first thing I'd look at getting repaired/replaced.

Also make sure the silicone oil doesn't get into you hop up unit or you'll have no accuracy at all

.

I was hoping you might know somewhere closer to home for the mags but oh well, thanks!

.22 Lover · 17-11-2009 5:00pm

Dread-Lock wrote: »

I can't say for a 100% certainty that the bent spring is causing the problem. But thats the first thing I'd look at getting repaired/replaced.

Also make sure the silicone oil doesn't get into you hop up unit or you'll have no accuracy at all .

I was hoping you might know somewhere closer to home for the mags but oh well, thanks!

Airsoft Eire may have some

Glock 26C problem

Comments