23 mm Crank remover

sexpot

Hello,

I really didn't want to start a new thread for this but I'm in desperate need of help. I've been pulling my hair out for the last week. It all started when I got my hand son an old Wes Mason frame, it's in bits but parts are good. Problem is though, the crank is a Tevano, so it's non standard 23 mm thread. Anyone have one of these they'd let me borrow or buy or even know anywhere I could get one? Or does anyone know other techniques for removing cranks?

Found one online but it's 40 blips and has to come from 'Merica so not really into that.

Any help would be appreciated.

Thanks,

Paul

JMJR

Do you know a car mechanic?
I have used the following three at one stage or another

http://www.drapertools.com/b2c/b2citmdsp.pgm?pp_skmno=13908

http://www.drapertools.com/b2c/b2citmdsp.pgm?pp_skmno=13907

There may not be enough clearance or access around the crank to use the above two but they are the first choice. If not then this will do

http://www.drapertools.com/b2c/b2citmdsp.pgm?pp_skmno=14159

I have not used this one but think it would work also

http://www.drapertools.com/b2c/b2citmdsp.pgm?pp_skmno=13914

If you are still stuck you are welcome to borrow them, just pm me. (Assuming that you are in Dublin as I am)
John

Húrin

I live in Rathmines in Dublin and I have a neighbour who has an old crank puller that is too big for modern cranks so that might be thing. I'll check if it's 23mm diameter

irishmotorist

JMJR wrote: »

Do you know a car mechanic?
I have used the following three at one stage or another

http://www.drapertools.com/b2c/b2citmdsp.pgm?pp_skmno=13908

http://www.drapertools.com/b2c/b2citmdsp.pgm?pp_skmno=13907

There may not be enough clearance or access around the crank to use the above two but they are the first choice. If not then this will do

http://www.drapertools.com/b2c/b2citmdsp.pgm?pp_skmno=14159

I have not used this one but think it would work also

http://www.drapertools.com/b2c/b2citmdsp.pgm?pp_skmno=13914

If you are still stuck you are welcome to borrow them, just pm me. (Assuming that you are in Dublin as I am)
John

Flippin 'ell! Do you have finger nail pliers, hot pokers and an Iron Maiden too?

sexpot

I think you've come up trumps here JMJR, thanks a million for the advice. Would it be possible to use the first one you have? It should be perfect. I could bring the frame over and do it there and then?

Thanks,

Paul

JMJR

pm sent
John