Need help identifying part of AEG

T4RGET

Hi all,
I was wondering if anyone could help in finding out where this part is from, i was taking my gun apart , not the gear box, but a little metallic circle fell out, well half of it, the other half was jammed in the gear box, it is all crumpled up, so now i have 2 halves:(
Anyways does anyone know where it may have come from? i was guessing the piston area but no sure, no picture sorry
thanks:)

thermo

T4RGET wrote: »

Hi all,
I was wondering if anyone could help in finding out where this part is from, i was taking my gun apart , not the gear box, but a little metallic circle fell out, well half of it, the other half was jammed in the gear box, it is all crumpled up, so now i have 2 halves:(
Anyways does anyone know where it may have come from? i was guessing the piston area but no sure, no picture sorry
thanks:)

it could be the the plate that goes between the motor and the height adjustment screw,,,,, hard to tell without a pic or approx size, thickness

Witcher

Could you post a pic of it possibly?:)

Stercus Accidit

thermo wrote: »

it could be the the plate that goes between the motor and the height adjustment screw,,,,, hard to tell without a pic or approx size, thickness

This is probably it, what aeg is it?

T4RGET

sorry guys no picture, it is approx. 2cm in diameter, and about 3mm thick, i will try post picture when i get it back of my friend, it is a circle with a groove in it on one side and it bulging out on other, i will try find pic on net, i soppose if one of you lads have an idea what i'm blabbering on about:rolleyes: you can post it up and i'll tell you if that is, kind of guess work but still:D

Smokerkl

Sounds like the motor plate to me buddy..
S..

Dr_Pepper

Smokerkl wrote: »

Sounds like the motor plate to me buddy..
S..

+1.

If so its supposed to go between the motor adjustment screw on the butt of the handgrip and the motor.

T4RGET

ok so say if it is what could make it crumple up like i said like one half is fine but the other half is completey destroyed, and is it important, i haven't firedit since it fell out and don't intend to untill itis replaced but is it important

Firekitten

T4RGET wrote: »

sorry guys no picture, it is approx. 2cm in diameter, and about 3mm thick, i will try post picture when i get it back of my friend, it is a circle with a groove in it on one side and it bulging out on other, i will try find pic on net, i soppose if one of you lads have an idea what i'm blabbering on about:rolleyes: you can post it up and i'll tell you if that is, kind of guess work but still:D

Smokerkl wrote: »

Sounds like the motor plate to me buddy..
S..

not the motor base ajustment plate at 2cm diameter... and not exactly crushable...

WHERE did it fall out of? WHERE was it in the gun? and what gun? i cant think of any guns with 2cm x 3mm disks in them.

thermo

i think his demensions may be a little off as it would take a bit of force to crush a 3mm plate,,,,,,,,,,,,,,,,

T4RGET

you are prob right its prob more like 1.5 if even, it fell out when i wascleaninggun, i took gun apart except the gear box and i dont were it came from, i have a SCAR dboys...

Masada

what colour is it, is it heavy, using money coins what would be the closest comparison for size? where exactly did it fall from on the gun? magwell? grip? barrel etc etc.

Smokerkl

Even if your size guessing is slightly off then it cant be anything from an SCAR really except the motor plate? How it got half crushed is anybodys guess like!! It could be a shim but I doubt it as they have holes in the middle? Is the little plate solid?? Cos i thinking if it was the motor plate somehow fell out during use then it could have fallen into gearbox and got mangled but thats simply inpossible got it would have stuck to the motor like buggery as thats what big f@$£k off magnets do---????? Unless we get a picture buddy cant really do much more to help afraid!! I am interested now though..
S..

Firekitten

Question... now the gun is reassembled... does it work or not?

If it works without that part its likely either not from the gun, or superfluous... so rock and roll...

also for future reference... cleaning an aeg... I'd not really bother disassembling it to do so, the only areas that need attention are the barrel on any regularity... Especially if you arent confident taking the gun down.

T4RGET

i got it lads thanks:D wen tto eirsoft today it turned out my guessing was kinda off itr was 1.5 cm an dit was a little ring that goes around the spring guide but an aeg has like 4-6 of em and even if they break it should still fire ok and to answer your question yes it does still fire....
Thanks though lads, and eirsoft:D

Dr_Pepper

But you said you didnt take apart the gearbox, so i take it this piece of the spring guide broke and ran havock around your gearbox?

Out of curiosity what was the make/model of gun?

Baneblade

the scar also has a spring that runs from the stock to the front of the barrel for the ejection port slide, he may be refering to this but i dont remember any rings on it

T4RGET

wel im not sure my self but that what the lads said up in eirsoft so... its a dboys scar light