Code for LG Televisions - Sky Remote Control

DanFWalsh · 29-06-2009 10:56pm #1

Any techie out there who might have the Code No. for LG TV's to operate the Sky remote control. The Sky brochure gives to Code No's for lots of popular TV's, but not for LG TV's

Verso · 29-06-2009 11:22pm

DanFWalsh wrote: »

Any techie out there who might have the Code No. for LG TV's to operate the Sky remote control. The Sky brochure gives to Code No's for lots of popular TV's, but not for LG TV's

I have had the same problem with my LG tv. For the Sky+ HD remote Sky advises to go to Interactive - Sky Active - Customer Support - Set Up Your Sky Remote and follow instructions. I did this and obtained a code but it was useless. I finally gave up.

However this might work for you.

Zonda999 · 30-06-2009 12:17am

Use the code for "goldstar".That worked for me on my 32" LG LCD. Its because, back in the '90's, LG TV's in the UK were branded Goldstar:rolleyes:

JHMEG · 30-06-2009 12:20am

Makes sense as LG stands for Lucky Goldstar.

keithoh · 30-06-2009 7:48am

DanFWalsh wrote: »

Any techie out there who might have the Code No. for LG TV's to operate the Sky remote control. The Sky brochure gives to Code No's for lots of popular TV's, but not for LG TV's

What's the full model name of your TV?

byte · 30-06-2009 6:50pm

Modedit: Thread moved to Satellite forum.

kbell · 30-06-2009 8:01pm

(TV)
(Select) and (Red button) together,light blinks twice.
206
(Select) to confirm

Doodoo · 30-06-2009 8:41pm

Turn your TV on.

2. Press tv on your Sky remote control.

3. Hold down select and the red button together for about two seconds, until the red light on the Sky remote control blinks twice.

4. Press tv on your Sky remote control again.

5. Key in the four digit code for your brand of TV. The light on the Sky remote control blinks twice. If the light blinks once only, recheck the code for your brand of TV and start again at Step 1.

6. Press the standby button on your Sky remote control. If your TV switches off, press select. The light on the Sky remote control blinks twice (code stored). If your TV does not switch off, press tv, then press the standby button. Repeat this (press tv, then standby) until your TV turns off, then press select (stores code).

If at this point the LED on the Sky remote control blinks three times then all possible codes for that make of receiver have been checked. Repeat from step one, ensuring that you enter the correct manufacturer code.

At the end of the sequence, if you see the TV Guide screen, the remote control setup process is complete. If you did not see the TV Guide screen, you must now complete the following steps.

8. Press tv on your Sky remote control.

9. Hold down select and the green button together for about two seconds, until the red light on the Sky remote control blinks twice.

10. Key in the number of the channel on your TV that you use for watching satellite TV.

11. Press select on your Sky remote control. The red light blinks twice. The remote control setup process is complete.

LG Lucky Goldstar
20LCR1
SKY+ Rev 8
0206
ashley hawkins

26LC2R
SKY+ Rev 8
206
Peter

29FD6ALQ
Sky Rev 8
0206
Clive

32LB1DB
Sky Rev 8
0206
G Gibson

32 LC2D
SKY Rev 6
0206
Nils

32LX2R
SKY+ Rev 6 (?)
037
trevor

32LX2R
Sky Rev 8
0056,
0206
Ian
andy

32LZ2R
SKY Rev 4 or earlier
0037
GooseDog

37LB1D
Sky Rev 8
206
simon

37LC2DB
SKY Rev 4 or earlier
0056
g pepperrell

37LC2DB
Sky Rev 8
206
Adam Wilkinson

37LC2DB
SKY+ Rev 8
0206
Michael B

42LC2DB
Sky Rev 8
0056
Chris Lee

42PC1D/
SKY Rev 4 or earlier
536
mark baker

42PC1DVA
Sky Rev 8
536,0056
MALCOLM

42PX5D
SKY Rev 6
0065
ben booer

42PX5D
Sky Rev 8
1206
ANGIE

50PCID
SKY Rev 6
0065
terry

50PCIDA
SKY Rev 4 or earlier
0065
mr r

DI28Z12
SKY Rev 4 or earlier
584
Ted Warren

FLATRON
SKY+ Rev 6
0065
Justin Dean

RE44SZ21RD
SKY+ Rev 6
Sky+HD Rev 8
037
gavin court

RI 28CZ10RX
SKY Rev 6
742
Ray

RI32CZ10RX
SKY Rev 8
0742
Richard

RZ-15LA32
SKY Rev 6
065
ronnie fletcher

RZ-15LA70
SKY Rev 8
0206
MR B, BRY

RZ 20LA70
SKY Rev 8
206
stef w

RZ32L255
SKY Rev 4 or earlier
0063
DONOVAN

RZ32LZ55
Sky Rev 8
0206
0056
Dave R
bart simpson

RZ-37LZ55
SKY+ Rev 6
1206
Dan
Note: The LG codes that Sky have provided us to work with our newer television sets are; 0037, 0056, 0060, 0065, 0080, 0081, 0125, 0137, 0178, 0191, 0204, 0244, 0245, 0275, 0318, 0389, 0391, 0398, 0405, 0459, 0502, 0742, 1146, 1367. We also have some older codes; 206, 037, 060, 065, 080, 137, 191, 244, 245, 275, 318, 389, 391, 398, 405, 459, 502. The codes are stored in a database of the Sky remote. If the above codes don't work you may need to buy the latest Sky remote. Otherwise it is a matter of waiting for the new Sky remote which may have the updated codes. Best regards, LG Electronics.

If none of the above codes work try this:

1) Switch on the TV set

2) Press the TV button on the Sky Remote

3) Hold down the select and red buttons for 2-3 seconds until the LED blinks twice

4) Press the standby button on the Sky Remote (The TV should go to standby)

5) Press select to store this setting

If the TV does not go into standby press the TV button then the standby button, then TV then standby, keep repeating this until successful.

Seems to be a handy way if you can't find the code for a TV.
It worked after about the 6th or 7th time hitting TV then Standby for me.

byte · 30-06-2009 10:02pm

@ Doodoo:
I'd appreciate that you'd link to whereever you copied the post from.

Doodoo · 01-07-2009 5:58pm

I would if i could remember. I saved a bigger file about a year ago and just gave a smaller version

jayojackass · 29-07-2009 5:08pm

http://www.sky.com/portal/site/skycom/skyhelpcentre/producthelp?nodeId=73a6e9e0-0ade-4eed-810b-cec670799bcc&articleId=11320303

This is the link on sky help center. Codes for LG are: 1293,1206 and 0206. Hope this help people too.

reggaeman · 13-06-2010 3:01am

One of these is the code for lg 42pj350. 1293 or 1206.

Doodoo wrote: »

Turn your TV on.

2. Press tv on your Skyremote control.

3. Hold down select and the red button together for about two seconds, until the red light on the Skyremote control blinks twice.

4. Press tv on your Skyremote control again.

5. Key in the four digit code for your brand of TV. The light on the Skyremote control blinks twice. If the light blinks once only, recheck the code for your brand of TV and start again at Step 1.

6. Press the standby button on your Skyremote control. If your TV switches off, press select. The light on the Skyremote control blinks twice (code stored). If your TV does not switch off, press tv, then press the standby button. Repeat this (press tv, then standby) until your TV turns off, then press select (stores code).

If at this point the LED on the Skyremote control blinks three times then all possible codes for that make of receiver have been checked. Repeat from step one, ensuring that you enter the correct manufacturer code.

At the end of the sequence, if you see the TV Guide screen, the remote control setup process is complete. If you did not see the TV Guide screen, you must now complete the following steps.

8. Press tv on your Skyremote control.

9. Hold down select and the green button together for about two seconds, until the red light on the Skyremote control blinks twice.

10. Key in the number of the channel on your TV that you use for watching satellite TV.

11. Press select on your Skyremote control. The red light blinks twice. The remote control setup process is complete.

LG Lucky Goldstar
20LCR1
SKY+ Rev 8
0206
ashley hawkins

26LC2R
SKY+ Rev 8
206
Peter

29FD6ALQ
Sky Rev 8
0206
Clive

32LB1DB
Sky Rev 8
0206
G Gibson

32 LC2D
SKY Rev 6
0206
Nils

32LX2R
SKY+ Rev 6 (?)
037
trevor

32LX2R
Sky Rev 8
0056,
0206
Ian
andy

32LZ2R
SKY Rev 4 or earlier
0037
GooseDog

37LB1D
Sky Rev 8
206
simon

37LC2DB
SKY Rev 4 or earlier
0056
g pepperrell

37LC2DB
Sky Rev 8
206
Adam Wilkinson

37LC2DB
SKY+ Rev 8
0206
Michael B

42LC2DB
Sky Rev 8
0056
Chris Lee

42PC1D/
SKY Rev 4 or earlier
536
mark baker

42PC1DVA
Sky Rev 8
536,0056
MALCOLM

42PX5D
SKY Rev 6
0065
ben booer

42PX5D
Sky Rev 8
1206
ANGIE

50PCID
SKY Rev 6
0065
terry

50PCIDA
SKY Rev 4 or earlier
0065
mr r

DI28Z12
SKY Rev 4 or earlier
584
Ted Warren

FLATRON
SKY+ Rev 6
0065
Justin Dean

RE44SZ21RD
SKY+ Rev 6
Sky+HD Rev 8
037
gavin court

RI 28CZ10RX
SKY Rev 6
742
Ray

RI32CZ10RX
SKY Rev 8
0742
Richard

RZ-15LA32
SKY Rev 6
065
ronnie fletcher

RZ-15LA70
SKY Rev 8
0206
MR B, BRY

RZ 20LA70
SKY Rev 8
206
stef w

RZ32L255
SKY Rev 4 or earlier
0063
DONOVAN

RZ32LZ55
Sky Rev 8
0206
0056
Dave R
bart simpson

RZ-37LZ55
SKY+ Rev 6
1206
Dan
Note: The LG codes that Sky have provided us to work with our newer television sets are; 0037, 0056, 0060, 0065, 0080, 0081, 0125, 0137, 0178, 0191, 0204, 0244, 0245, 0275, 0318, 0389, 0391, 0398, 0405, 0459, 0502, 0742, 1146, 1367. We also have some older codes; 206, 037, 060, 065, 080, 137, 191, 244, 245, 275, 318, 389, 391, 398, 405, 459, 502. The codes are stored in a database of the Sky remote. If the above codes don't work you may need to buy the latest Sky remote. Otherwise it is a matter of waiting for the new Sky remote which may have the updated codes. Best regards, LG Electronics.

If none of the above codes work try this:

1) Switch on the TV set

2) Press the TV button on the Sky Remote

3) Hold down the select and red buttons for 2-3 seconds until the LED blinks twice

4) Press the standby button on the Sky Remote (The TV should go to standby)

5) Press select to store this setting

If the TV does not go into standby press the TV button then the standby button, then TV then standby, keep repeating this until successful.

Seems to be a handy way if you can't find the code for a TV.
It worked after about the 6th or 7th time hitting TV then Standby for me.

Code for LG Televisions - Sky Remote Control

Comments