Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Lads need a Jtag interface for a Dreambox 7000

  • 13-06-2009 1:00pm
    #1
    Registered Users, Registered Users 2 Posts: 13,478 ✭✭✭✭


    The bootloader has crashed on mine and need a Jtag interface to fix it cheapest I've found on Ebay is €30 from Germany, any local UK/Ireland net shops that you know of who might have a cheaper one?

    Thanks in advance


Comments

  • Registered Users, Registered Users 2 Posts: 32,417 ✭✭✭✭watty


    That's a typical price.

    If you get a bus buffer IC and cut the printer plug off an old printer cable you can make one if you can solder. Plenty of circuits on the internet.

    The dream box end uses 5 wires and the pins used on the parallel port depend on who's JTAG PC software you are using (xilinx and ARM JTAG adaptors are identical except for phyiscal connector on target end and pins used on Parallel port of PC).

    The USB versions simply have a parallel or serial port USB adaptor built in. They are only needed if you have no parallel port. NO faster.

    THe bus buffer IC is used to buffer PC level clock & data in to target system volts and buffer the return Data out. THe other two target pins are Supply and ground.


  • Registered Users, Registered Users 2 Posts: 8,148 ✭✭✭Ronan|Raven


    Check your pm Snake.


Advertisement