Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Fairly Basic Trixbox Question

  • 13-05-2009 08:32PM
    #1
    4Sheets
    Closed Accounts Posts: 613 ✭✭✭


    Ok I searched and read as much as I can about this problem for two days and now I need help.
    Basically it a fresh trixbox install,packages updated etc..AX100-P el cheapo card..working fine for incoming calls.
    For outbound calls from a sip ext the calls gets as far as the trunk but does'nt seem to dial the digits.I have a gsm gateway attached so I visually see what digits are being sent..which is none..altough it trixbox does take the line..From the sip phone I can go-off hook and dial 9 and get the dial tone on the line..
    Also the cli shows the numbers going to trunk so dialplan which is very simple is ok..after dialling out the line shows as connected and holds until the call is terminted..CDR shows all calls as answered..
    Any ideas?Be very greatful for a prompt solution


Comments

  • #2
    daffy_duc
    Registered Users, Registered Users 2 Posts: 194 ✭✭daffy_duc


    4Sheets wrote: »
    Ok I searched and read as much as I can about this problem for two days and now I need help.
    Basically it a fresh trixbox install,packages updated etc..AX100-P el cheapo card..working fine for incoming calls.
    For outbound calls from a sip ext the calls gets as far as the trunk but does'nt seem to dial the digits.I have a gsm gateway attached so I visually see what digits are being sent..which is none..altough it trixbox does take the line..From the sip phone I can go-off hook and dial 9 and get the dial tone on the line..
    Also the cli shows the numbers going to trunk so dialplan which is very simple is ok..after dialling out the line shows as connected and holds until the call is terminted..CDR shows all calls as answered..
    Any ideas?Be very greatful for a prompt solution

    The dialtone that you're hearing from your SIP phone is actually being generated by Asterisk on the Trixbox.
    Have you ensured that the dialtone sent by the GSM gateways matches the dialtones expected by Asterisk?


  • #3
    4Sheets
    Closed Accounts Posts: 613 ✭✭✭4Sheets


    daffy_duc wrote: »
    The dialtone that you're hearing from your SIP phone is actually being generated by Asterisk on the Trixbox.
    Have you ensured that the dialtone sent by the GSM gateways matches the dialtones expected by Asterisk?

    im fairly green with this stuff..how do I check that and what should it be?


  • #4
    4Sheets
    Closed Accounts Posts: 613 ✭✭✭4Sheets


    Faulty card..lesson--- dont buy cheap crap on ebay..openvox a400p..no problem!!


Advertisement