Advertisement
Help Keep Boards Alive. Support us by going ad free today. See here: https://subscriptions.boards.ie/.
If we do not hit our goal we will be forced to close the site.

Current status: https://keepboardsalive.com/

Annual subs are best for most impact. If you are still undecided on going Ad Free - you can also donate using the Paypal Donate option. All contribution helps. Thank you.
https://www.boards.ie/group/1878-subscribers-forum

Private Group for paid up members of Boards.ie. Join the club.

Linksys Pap2t Config Problem with Blueface

  • 09-05-2009 05:06PM
    #1
    Devi
    Closed Accounts Posts: 446 ✭✭


    Hi All
    I have configured the Linksys adapter as per the blueface website instructions but cannot ring in or out.
    I have a ntl/upc netgear router, I presume I have to configure this in some way but dont know how, I am a voip novice. I have contacted the blueface support team but I presume they will not get back until Monday.
    Can anybody help?


Comments

  • #2
    Some_Person
    Closed Accounts Posts: 491 ✭✭Some_Person


    You will have to port forward in your router.To find your router's IP address go to start>run, and type "cmd" and press ok, then once the command window is open type "ipconfig" and press enter, find the ip address that is beside "default gateway" and enter that into your web browser. You might need to login with a password and username. Once in go to port forwarding (might be under LAN or something) and forward UDP ports 16384,16385, 16386,5060 and 5061 to your Linksys PAP2T's IP address.


  • #3
    Devi
    Closed Accounts Posts: 446 ✭✭Devi


    Some_Person wrote: »
    You will have to port forward in your router.To find your router's IP address go to start>run, and type "cmd" and press ok, then once the command window is open type "ipconfig" and press enter, find the ip address that is beside "default gateway" and enter that into your web browser. You might need to login with a password and username. Once in go to port forwarding (might be under LAN or something) and forward UDP ports 16384,16385, 16386,5060 and 5061 to your Linksys PAP2T's IP address.

    Just done that now. Can get incoming calls now but no outgoing. Ive googled this for the past few hours now but cant find a solution.


Advertisement