Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

Combining UHF plus Output from an LNB

  • 21-02-2009 1:02am
    #1
    ronan.michael@g
    Registered Users, Registered Users 2 Posts: 100 ✭✭


    Using RG58 cable - I want to combine my Colour King aerial - uhf group A 3rock - with the output of my (adjacent) sat dish LNB. What do I need? (I'll require the reverse down at the sat rx). Is it possible? What's needed and where to purchase? Perhaps Radionics? Peats? Many thanks, Michael r.


Comments

  • #2
    tellyman
    Closed Accounts Posts: 12 ✭tellyman


    Satworld supply diplexers for this purpose. Don't use RG58 though you need double screened 75 Ohm "satellite cable".


  • #3
    Myxomatosis
    Closed Accounts Posts: 429 ✭✭Myxomatosis


    You need two of these(or only one if your receiver has a built in splitter):
    sat_uhf.jpg


    You'll see some that go from 0hz to 1000mhz, which is not suitable for satellite.
    I've personally not seen any of the above in any hardware or electronics shops.


  • #4
    ronan.michael@g
    Registered Users, Registered Users 2 Posts: 100 ✭✭ronan.michael@g


    Myxomatosis wrote: »
    You need two of these(or only one if your receiver has a built in splitter):
    sat_uhf.jpg


    You'll see some that go from 0hz to 1000mhz, which is not suitable for satellite.
    I've personally not seen any of the above in any hardware or electronics shops.

    Many thanks to all who replied - my life has become suddenly easier! Thanks all Michael r.


  • #5
    ronan.michael@g
    Registered Users, Registered Users 2 Posts: 100 ✭✭ronan.michael@g


    tellyman wrote: »
    Satworld supply diplexers for this purpose. Don't use RG58 though you need double screened 75 Ohm "satellite cable".

    Thanks Tellyman - will pursue. Michael r.


Advertisement