Looking for a carpenter in North Dublin/Meath to build accoustic panels

Sister Ray

Hi,

I'm looking for the services of a carpenter to build me a set of 10 acoustic
trap panels for my home studio.

The design they should be based on is in this thread on the Gearslutz forum,
look at the posts on that page by "Cojo".
It concerns the acoustic traps that are open on the side.

The inside of the frame needs to be 1200mm*600mm and 170mm deep.
The fibreglass wool inside will weigh 16.2 kg, so that's what the frame will
need to support if it's hung from a wall or ceiling.

I will supply the specific fibreglass wool that needs to be used, and have it
delivered at the carpenter's workshop.
The wood will probably need to be provided by the carpenter.
I will also put the cloth on the traps myself.

I'm based in Ratoath, so it's probably best if the carpenter is based in that
area, however if the traps can be transported by the carpenter, there's no
problem with being located somewhere else, as long as that doesn't add too
much to the cost.

If you're interested in doing this, and would be able to provide me with a
quote, or if you know someone that could do this, please leave me a pm or
an email.

If this is delivered to spec and I'm happy with the outcome, there will be the
potential to do a set of 4 triangular corner traps too.

Kind regards,

Sister Ray

galwaydude18

Hi I would make these for you no problem at all if you wanted.. I'm based in mullingar so I could get these to you no problem at all..