Running Campag Cassette on Shimano Wheel

scottreynolds · 12-01-2009 07:29PM #1

I have some Askiums I use for the turbo from my Scott bike which runs Shimano. I'm currently buying the components to put together a Campag bike but wanted to know how, or if, I can run a Campag cassette on my old wheel.
Its a spare wheel just for use on the turbo.

RobFowl · 12-01-2009 07:34PM

You could but won't be able to use all the cogs. I think you'll only get 4-5 at best (spacing is different) with a shimano block

Chips Lovell · 12-01-2009 07:41PM

You won't get a Campag cassette onto Shimano hubs.

You might have more joy just leaving a Shimano cassette on the wheel and trying it with your Campag drivetrain.

10 speed spacing is very simliar and I ran an Ultegra drivetrain with a Campagnolo hub and cassette for over a year and it shifted perfectly. My wife's bike is set up that way now and it works just fine as well. I've yet to try the other way around though.

CheGuedara · 12-01-2009 07:51PM

El tonto's right - the campag casette splines wont allow it to fit a shimano hub (and vice versa)

however if you're running 9 speed shimano equipped rear wheel it will work with a 9 speed campag grouppo

scottreynolds · 12-01-2009 08:55PM

el tonto wrote: »

You won't get a Campag cassette onto Shimano hubs.

Is there not a shim available to convert -- or am I dreaming?

CheGuedara · 12-01-2009 09:05PM

scottreynolds wrote: »

Is there not a shim available to convert -- or am I dreaming?

Sorry Scott, no converter for this one AFAIK. American Classic do (or certainly did) cassettes that fit shimano hubs but were campag spaced and vice versa. You could consider something like this (10spd), http://www.lickbike.com/productpage.aspx?PART_NUM_SUB=%272276-01%27. Pricey though

Karma · 12-01-2009 09:59PM

you can get a campy freehub for mavic hubs, why not order a replacement one? got two sets 2 years ago, 1 campy and 1 shimano.
hope this helps.

Running Campag Cassette on Shimano Wheel

Comments