Advertisement
If you have a new account but are having problems posting or verifying your account, please email us on hello@boards.ie for help. Thanks :)
Hello all! Please ensure that you are posting a new thread or question in the appropriate forum. The Feedback forum is overwhelmed with questions that are having to be moved elsewhere. If you need help to verify your account contact hello@boards.ie
Hi there,
There is an issue with role permissions that is being worked on at the moment.
If you are having trouble with access or permissions on regional forums please post here to get access: https://www.boards.ie/discussion/2058365403/you-do-not-have-permission-for-that#latest

jp8000 initialize

  • 24-12-2008 10:50pm
    #1
    seannash
    Registered Users, Registered Users 2 Posts: 5,672 ✭✭✭


    just got this today,looking to see if there is a command to set it to a blank template?


Comments

  • #2
    trackmixstudio
    Registered Users, Registered Users 2 Posts: 843 ✭✭✭trackmixstudio


    use "quotations" when doing a google search. Found this in seconds.
    http://www.suonoelettronico.com/roland_jp8000.htm

    Before we proceed, execute the following procedure to Initialize a Performance:

    1) Press the PERFORM/PATCH button until PERFORM is in the left corner of the display.

    2) While holding the SHIFT button, press the INT/UTIL ([7]) button until Initialize is displayed.

    3) Use the BANK/VALUE buttons to display Initialize PERFORM: TEMP.

    4) Press the WRITE button to execute the Initialization. When complete, the display should will read INIT PERFORMANCE.

    When you play the keyboard of the JP-8000, you will hear a sawtooth waveform produced by OSC 1 and a triangle waveform produced by OSC 2.

    NOTE: The Initialized Performance resides in the Temporary Memory Area and does not affect the previous Performance settings. To recall the previously saved Performance settings, simply press the corresponding number button under the display. The original Performance will then be re-called to that memory location.


  • #3
    seannash
    Registered Users, Registered Users 2 Posts: 5,672 ✭✭✭seannash


    trackmixstudio wrote: »
    use "quotations" when doing a google search. Found this in seconds.
    http://www.suonoelettronico.com/roland_jp8000.htm

    Before we proceed, execute the following procedure to Initialize a Performance:

    1) Press the PERFORM/PATCH button until PERFORM is in the left corner of the display.

    2) While holding the SHIFT button, press the INT/UTIL ([7]) button until Initialize is displayed.

    3) Use the BANK/VALUE buttons to display Initialize PERFORM: TEMP.

    4) Press the WRITE button to execute the Initialization. When complete, the display should will read INIT PERFORMANCE.

    When you play the keyboard of the JP-8000, you will hear a sawtooth waveform produced by OSC 1 and a triangle waveform produced by OSC 2.

    NOTE: The Initialized Performance resides in the Temporary Memory Area and does not affect the previous Performance settings. To recall the previously saved Performance settings, simply press the corresponding number button under the display. The original Performance will then be re-called to that memory location.
    thanks man i searched but couldnt bring up anything,checked the manual too.
    right time for me to ignore the girlfriend and have a play with this instrument (ooh errr)


Advertisement